The Culture of CARE is an program created by the Associated General Contractors of America (AGC) and the AGC of Washington to support companies in creating diverse, safe, welcoming, and inclusive job sites and promote diversity and inclusion in the construction industry. Culture of CARE is more than just caring about people; it is asking companies to commit to building work environments where every employee feels valued, respected, and heard through the programs four pillars: Commit, Attract, Retain and Empower. This episode of AGC’s ConstructorCast podcast highlights the partnership between AGC and FMI in developing a series of articles that explore how construction firms are successfully implementing the four pillars of Culture of CARE. In this podcast episode, we spotlight the transformative impact of a Culture of CARE's two pivotal pillars: Commit and Empower, specifically in the context of fostering leadership and accountability within construction firms. You will hear from two leading construction firms who share how a steadfast commitment from leadership sets the stage for a culture of inclusion and belonging. We explore how empowering employees at all levels contributes to a sense of responsibility, aligning individual actions with organizational values. Join us to understand how cultivating leadership and accountability through a Culture of CARE not only enhances workplace inclusivity but also propels construction companies toward sustained success. Guests: Michelle Thompson Senior Consultant | FMI Consulting - https://fmicorp.com Bill Aalerud Executive Vice President | Columbia Construction Co. - https://www.columbiacc.com Chair, Board of Directors - AGC of Massachusetts Stephanie Roldan Vice President Learning & Development, Director of Lean Culture | Rosendin Electric - https://www.rosendin.com Co-host Construction DEI Talks: https://constructiondeitalks.com Resources: • Visit www.BuildCulture.org and find out more. • Take the Culture of CARE pledge: https://buildculture.org/commit • See the list of Impact Champions who have already taken the pledge: https://buildculture.org/impact-champions/ • Take the AGC Diversity & Inclusion Assessment - https://www.agc.org/culture-assessment 2023 FMI Talent Study: https://fmicorp.com/insights/industry-insights/2023-fmi-talent-study HERstory Emerging Managers Institute: https://fmicorp.com/consulting/training/herstory-emerging-managers-institute See the article in the latest issue of Constructor Magazine: https://constuctorjanfeb24.mydigitalpublication.com/publication/?i=811684 Direct link to the article at Culture of CARE: https://buildculture.org/commit-to-employee-wellbeing

In this episode, AGC of America’s chief economist, Ken Simonson becomes your guide through the bustling landscape of construction economics, trends shaping the industry, sound projections for the upcoming year, and how all of the above can impact builders and stakeholders. Tune in to see what contractors can expect in 2024! Guest: Ken Simonson Chief Economist AGC of America Subscribe to the DataDIGest: https://marketplace.agc.org/Store/ItemDetail?iProductCode=4401

Join us as we explore the dynamic intersection of cybersecurity and the commercial construction industry. Our guest, CJ Dietzman at Alliant Insurance Services, talks about the latest trends in cyber threats, risk management strategies, and innovative solutions shaping the future of digital resilience on construction sites. Don't miss this insightful episode for a blueprint for safeguarding your projects against evolving cyber challenges. #ConstructorCast #Cybersecurity #ConstructionTech #AlliantInsurance #TheMoreRewardingWay Guest: CJ Dietzman Senior Vice President, Alliant Cyber Alliant Insurance Services https://www.linkedin.com/in/cj-dietzman-cissp-cisa Resources: Read Cyber Risk & Security Considerations in the Construction Industry: https://alliant.com/news-resources/article-cyber-risk-security-considerations-in-the-construction-industry/ Learn more about Alliant Cyber: https://alliant.com/risk-management/risk-solutions/cyber/ The NIST Cybersecurity Framework: https://www.nist.gov/cyberframework ISO/IEC 27001: https://www.iso.org/standard/27001 Contact Alliant Cyber at alliantcyber@alliant.com

In this eye-opening episode, we sit down with construction professionals, Phillippe Falkner of Ed Bell Construction Company, and Perry Silvey from BT Construction who are true champions of trenching and excavation safety. Discover the critical importance of safeguarding lives and preventing injuries in the construction industry. Gain valuable insights and practical tips to ensure every project is built on a foundation of safety first. Join us as we unearth the secrets to saving lives below ground. OSHA Trenching and Excavation Webpage: https://www.osha.gov/trenching-excavation Webinar - Staying Safe When Digging: Trenching & Excavation Basics https://www.youtube.com/watch?v=mke80vDNIQ4 AGC Targeted Topics Training Resources - https://www.agc.org/agc-safety-and-health-training-resources Partners for Safe Trenching and Excavation Operations: https://www.osha.gov/alliances/safe-trenching-excavation/safe-trenching-excavation Think Inside The Box: https://thinkinsidethebox.info Guests: Perry Silvey, CHST Safety Manager BT Construction Phillippe Falkner Safety Director, Project Management, and Business Services Specialist Ed Bell Construction Company Kevin Cannon, CSP, ARM Senior Director, Safety, Health & Risk Management AGC of America

Unleash the power of imagination in our latest episode, as we dive into the captivating story of “Grit Leads to Greatness”, a children’s book written by our two guests Chris Eccleston and Jenny Schroen. With workforce issues challenging the construction industry, this brilliant duo saw an opportunity to sow the seeds of interest early on and cultivate a generation that thrives on skill, creativity, and passion. Don't miss out on this enlightening conversation that combines the magic of storytelling with the practicality of real-world skills. Hit that play button and let's embark on a journey of reshaping perceptions about construction, breaking down barriers, and creating exciting pathways for our future builders, architects, and engineers! Chris Eccleston, LEED, AP, CHC President & Founder Delmarva Veteran Builders Chris@delmarvaveteranbuilders.com Jenny Kerr Schroen Creative Developer Delmarva Veteran Builders Jenny@delmarvaveteranbuilders.com Resources: https://www.gritleadstogreatness.com/ https://www.delmarvaveteranbuilders.com/

On this episode of ConstructorCast, we spotlight success stories and provide actionable strategies for creating a more diverse and inclusive future within the construction industry. You’ll hear from our guest host, Jorge Quezada, and two winners of this year's AGC Diversity & Inclusion awards program – Brad Lewis of Hensel Phelps and Judith Monrouzeau of Bermúdez Longo Díaz Massó (BLDM). They will share how they approached the application, what the recognition means to them and their companies, and how they are learning and getting better from the process. Guests: Judith Monrouzeau, PhD. SPHR. Executive Director of Human Resources Safety & Compliance Bermúdez Longo Díaz Massó, LLC. https://www.bldmpr.com/ BLDM D&I Program One-Pager: https://go.agc.org/DEI-BLDM Brad Lewis, ECMA Corporate Director of Supplier Diversity Hensel Phelps https://www.henselphelps.com/ Hensel Phelps D&I Program One-Pager: https://go.agc.org/DEI_HenselPhelps To explore more about Construction DEI Talks and access their episodes, resources and community, visit their website at https://constructiondeitalks.com. Find out more about AGC’s Diversity & Inclusion Committee: https://www.agc.org/diversity AGC’s Culture of CARE: https://buildculture.org/ AGC’s Diversity & Inclusion Assessment: https://www.agc.org/culture-assessment The AGC Diversity & Inclusion awards are open to general contractors, specialty contractors, and service and supply provider companies in good standing of at least one AGC Chapter. Nominations must be submitted by principals or officers of firms, or with their written permission. https://www.agc.org/DiversityAwards

Construction has one of the highest suicide rates of any industry. It is four times higher than the national suicide average and five times higher than that of all other construction fatalities combined, according to the Centers for Disease Control. AGC of America has established a Mental Health & Suicide Prevention Task Force to stand up against this issue and is honored to have had the chance to speak with the two co-chairs for this episode - Mandi Kime of AGC of Washington and Brandon Anderson of AGC of Missouri. Together they are leading the fight for an industry in crisis. In the episode, they share why they are so passionate, and how they are working to combat construction’s leading mental health difficulties and the stigma that accompanies them. Guests: Mandi Kime Director of Safety AGC of Washington - https://www.agcwa.com Brandon Anderson Vice President of Safety AGC of Missouri - https://www.agcmo.org Resources: AGC of America Mental Health & Suicide Prevention website https://www.agc.org/safety

Construction Safety Week started in 2014, when more than 40 national and global construction firms comprising the Construction Industry Safety Initiative (CISI) group and the Incident and Injury Free (IIF) Forum joined forces with a single aim: to inspire everyone in the industry to be leaders in safety. On this episode, Mike Burke of Alberici Constructors and Dan Johnson of Mortenson, both serving as chairs on the Safety Week committee, share some history of the tradition, what this annual campaign means to them, and how you can get involved. This year's Construction Safety Week will take place May 1-5, 2023. Visit the website to find all the resources you need. Guests: Michael Burke Chief Operating Officer Alberici Constructors alberici.com Dan Johnson Chief Executive Officer Mortenson mortenson.com Resources: Construction Safety Week website: www.constructionsafetyweek.com

Texters beware: Your data is not your own! Joining on this episode to share their experiences on the front line are Lauren Abeyta, COO at Construction Discovery Experts, and Kristin Protas, VP & Deputy General Counsel at Gilbane Building Company. They talk about the realities and proliferation of electronic communication and how to successfully manage your digital footprint and train your teams to keep you out of trouble. Lauren Abeyta Founder & Chief Operating Officer Construction Discovery Experts https://www.cdelegal.com/#about Kristin Protas VP, Deputy General Counsel Gilbane Building Company https://www.gilbaneco.com/ AGC Hot Topic Paper: The Cutting Edge – Strategically Managing ESI Risks, Costs and Burdens https://www.agc.org/sites/default/files/users/user22628/Managing%20ESI%20Risks%20Costs%20and%20Burdens_FINAL.pdf Presented in January 2023 by Gregory Chertoff, Co-Managing Partner of Peckar & Abramson’s New York office, during AGC’s annual Surety Bonding and Construction Risk Management Conference. https://risk.agc.org/ BIFF Communication: Brief, Informative, Friendly & Firm – created by the High Conflict Institute https://www.highconflictinstitute.com/hci-articles/responding-to-hostile-mail-biff

Traumatic Brain Injuries are responsible for 25% of all construction fatalities, and many life-altering injuries. With this information and emerging technology, many contractors are considering the transition from the traditional brim hardhat, to a chin-strap safety helmet. Joining on this episode to talk about their respective companies journey in this transition, are Seth Randall of Clark Construction, and Jamie Dabbs of TD Industries. Seth Randall, CSP, CHST Regional Safety Director, Infrastructure Group Clark Construction Group www.clarkconstruction.com Jamie Dabbs, CSP, ASP, CRIS Vice President, Safety, Health & Environmental TDIndustries www.tdindustries.com Kevin Cannon Senior Director, Safety & Health Services AGC of America kevin.cannon@agc.org www.hardhatstohelmets.org Photo for graphic provided by Clark Counstruction Group

On this episode of ConstructorCast, two of the nation’s leading construction economists will discuss where the economy is headed, construction categories they think will do particularly well, and share their insights on top issues including supply chains and inventories, finding qualified workers, and materials costs. Guests: A.C. Michael Guckes Senior Economist ConstructConnect Michael.guckes@constructconnect.com Construction Economic Resources https://www.constructconnect.com/economic-resources Construction Economic News https://www.constructconnect.com/construction-economic-news Kenneth D. Simonson Chief Economist Associated General Contractors of America (AGC) ken.simonson@agc.org Data Digest, a weekly one-page summary of economic news relevant to construction: https://store.agc.org/Store/Store/StoreLayouts/Item_Detail.aspx?iProductCode=4401&CATEGORY=1900 AGC's Construction Inflation Alert: https://www.agc.org/learn/construction-data/agc-construction-inflation-alert More AGC construction economic information: https://www.agc.org/learn/construction-data

Election day is two weeks away! Are you wondering how results could impact you and the industry? On this episode, AGC Chief Executive Officer Steve Sandherr, Jimmy Christianson, Vice President of Government Relations, and David Ashinoff, Director of Political Affairs discuss all things midterm elections including what congress has accomplished in the current cycle, match-up analysis, and seat predictions. Visit https://constructionvotes.com to register to vote or confirm registration status, obtain early voting and absentee ballot information, confirm your polling place, download employer resources, and more. Members are also encouraged to visit https://advocacy.agc.org to learn more about AGC’s political action committee (AGC PAC) and the Construction Advocacy Fund. Links: https://constructionvotes.com https://constructionadvocacyfund.agc.org/donate/ https://advocacy.agc.org/agc-pac This episode was recorded Oct. 12, 2022. Please be sure to keep up with recent polling results to make your most informed decision on Election Day!

Grappling with the maze of marijuana laws and your company policy? On this episode, Bill Judge of Drug Screening Compliance Institute talks about considerations for employers to create and enforce drug-testing policies that are consistent with the laws in all of the states in which they operate – as well as best practices for addressing safety-sensitive roles. Guest: William J. Judge, JD, LL.M. Drug Screening Compliance Institute bjudge@drugscreeningci.com www.askbilljudge.com Resources: At the federal level, marijuana is listed as a Schedule I drug (https://www.dea.gov/drug-information/drug-scheduling) under the Controlled Substances Act. Many federal contractors and all federal grantees are required by law to establish and maintain a drug-free workplace policy. In addition, some federal agencies have rules in place for specific industries/occupations that require employers to have drug testing programs. For example, the U.S. Department of Transportation (DOT)[https://www.transportation.gov/odapc] and the Federal Motor Carrier Safety Administration (FMCSA)[https://www.fmcsa.dot.gov/regulations/drug-alcohol-testing/overview-drug-and-alcohol-rules] have adopted drug testing rules for certain drivers. The Substance Abuse and Mental Health Services Administration (SAMHSA)[https://www.samhsa.gov/workplace/employer-resources/federal-laws] provides guidance to employers on how to implement drug-free workplaces that will comply with federal laws. States are continuing to legalize marijuana, either for medical use, recreational use, or both. Here are maps of where things currently stand in September 2022 – https://www.agc.org/sites/default/files/Files/ConstructorCast/THC_Group_2022Sep27.pdf. State laws may dictate how (and to what extent) employers can do pre-employment screenings, drug testing, or make employment decisions based on an employee’s drug use. Many employers choose to drug test employees because of safety-sensitive positions, reductions in rates for workers’ compensation insurance, or to ensure that their employees are not impaired on the job. It is particularly important that construction companies review current policies and evaluate the need for changes – based on evolving marijuana laws and to ensure employee safety and reduce company risk.

In this episode, AGC’s own Jimmy Christianson, Vice President of Government Relations, and Deniz Mustafa, Program Coordinator for the Building Division take a dive into what Buy America/n requirements are, why we have them, and what we may be able to expect from new Buy America Build America Act regulations that come with the Infrastructure Investment and Jobs Act. As government agencies work through their individual processes and procedures, AGC would like to prepare members for imminent changes involving material procurement. Guests: Deniz Mustafa, Program Coordinator, Building Division, AGC of America, deniz.mustafa@agc.org Jimmy Christianson, Vice President, Government Relations, AGC of America, jimmy.christianson@agc.org Resources: Made in America Office within the White House Office of Management and Budget: https://www.whitehouse.gov/omb/management/made-in-america/ AGC's comments to OMB: https://www.agc.org/sites/default/files/Files/Communications/Constructorcast/AGC%20Comments%20Re%20OMB%20RFI%20on%20BABAA%20Construction%20Materials%205.23.22.pdf https://www.agc.org/sites/default/files/Files/Communications/Constructorcast/AGC%20Supplemental%20BABAA%20Comments%20to%20OMB%20RFI%206.6.22.pdf

Who’s on the hook for design defects in design-build projects? It may not always be who you think. In this episode, Dirk Haire, co-chair of Fox Rothschild’s Construction Law Practice Group, and David Hecker, group general counsel overseeing all claims, litigation, and investigations for Kiewit Corporation, share their wealth of knowledge on design-build risk. Find out when and why contractors do not always bear the risk of design errors or omissions on a design-build project. This episode explains design-builders’ liability standard and discusses certain types of overreach by owners that merit pushback from design-builders. This podcast episode will help you: 1. Understand the differences between design and performance specifications and how they may govern design liability on a design-build project. 2. Determine when the Spearin Doctrine applies to design-build contracts. 3. Identify cases where a design-builder has received equitable adjustment for defect designs, as well as examples of cases where the design-builder incurred liability for design. 4. Learn how contracting officers’ actions and federal contracting rules and regulations can dramatically raise a design-builder’s risk exposure. Guests: Dirk Haire, Fox Rothschild LLP - https://www.foxrothschild.com/ David Hecker, Kiewit Corporation - https://www.kiewit.com/ Brian Perlberg (co-host), AGC of America - https://www.agc.org/contract Resources: AGC 2022 Convention Slides – https://www.agc.org/sites/default/files/Files/AGC%20Design%20Build%20Presentation%20March%202022(132260853.1)-C%20(1).pdf AGC Article -- Unfair Risk Allocation on Design-Build Project: https://www.agc.org/news/2022/05/23/unfair-risk-allocation-design-build-projects AGC Article -- When is the Price Right? Setting the GMP for Design-Build: https://www.agc.org/news/2022/06/27/when-price-right-setting-gmp-design-build AGC design-build page -- https://www.agc.org/design-build

Struggling to find enough workers? On this episode, three young construction professionals share their insights about how they made a decision on a full-time position and why their selected firms stood out. This episode was pre-recorded at AGC's Annual Convention. When recording on the road, audio isn't always studio-quality, but the content is worth the listen! Thanks for following! Guests: Our guests each bring different perspectives on the recruitment and hiring process and share what got them where they are now. Trent Fair - Pittsburg State University / Simpson Construction Services, https://simpsonconst.com/ Jack McGavran - Pittsburg State University / McCarthy Building Companies, Inc., https://www.mccarthy.com/ Collette LeManske - Kansas State University / Brinkmann Constructors, https://brinkmannconstructors.com/ Resources: AGC Student Chapters - Membership in an AGC Student Chapter provides young professionals with an opportunity to observe and develop their skills with current industry leaders. AGC of America, in conjunction with our local Chapters, supports more than 170 Student Chapters nationwide. https://www.agc.org/connect/chapters/student-chapters AGC Construction Leadership Council (CLC) - The purpose of the CLC is to act as a conduit for participants to network, exchange ideas about work and the industry, serve local communities and continuing education which includes both professional development and leadership skills. www.agc.org/clc Undergraduate and Graduate scholarship opportunities with AGC open July 1, 2022. Visit www.agc.org/foundation for more information.

In this episode, we cover the steps the Biden Administration has taken related to construction and the environment. AGC’s Director of Environmental Services Melinda Tomaino walks you through the environmental highlights and headlines on WOTUS (waters of the United States), species-related issues, climate change policy developments and implications for projects, and environmental review and approvals. Find out how AGC is making timely decisions and setting priorities, the important role AGC plays in policymaking, and how you can get involved. Show Notes: Guest: Melinda Tomaino Director, Environmental Services melinda.tomaino@agc.org @AGCEnvironment More Information: There are a few forums available for you to get involved – • Attend AGC meetings and conferences, such as the Construction Safety Health and Environmental Conference on July 26-28, 2022, or the peer group discussion for In-House Environmental Managers scheduled for July 27. https://shec.agc.org/ • Join the Environmental Forum and eForum listserv to hear about new developments and opportunities to engage. https://www.agc.org/industry-priorities/energy-environment/environmental-forum • Serve on the Steering Committee for the Environmental Forum (recruitment annually). https://www.agc.org/news/2021/11/18/volunteers-needed-serve-associations-environmental-steering-committee Read the latest AGC news on Energy & Environmental online at https://www.agc.org/environment. Learn about climate change implications on construction at https://www.agc.org/climate-change.

Construction Safety Week started in 2014, when more than 40 national and global construction firms comprising the Construction Industry Safety Initiative (CISI) group and the Incident and Injury Free (IIF) Forum joined forces with a single aim: to inspire everyone in the industry to be leaders in safety. On this episode, Ken Aldridge of Aldridge Electric, and Mike Burke of Alberici Constructors, both serving as chairs on the Safety Week committee, share some history of the tradition, what this annual campaign means to them, and how you can participate. This year’s Safety Week will take place May 2-6, 2022. Visit the website to find all the resources you need. Guests: Ken Aldridge, Chairman of the Board, Aldridge Electric aldridgegroup.com Michael Burke, Chief Operating Officer, Alberici Constructors alberici.com Resources: Construction Safety Week website: https://www.constructionsafetyweek.com/

Business Development within the construction industry presents multiple challenges as competition levels rise, continued supply obstacles occur, and labor shortages pressure companies to do more with less. On this episode, members of AGC’s Business Development Forum – Chris Martin, President at Atlas Marketing and Tonya Byrd (Jackson), Business Development Manager at Gilbane Building Company – discuss these challenges and share best practices and methods to help your construction company grow. Get ready for some first-hand stories of techniques and proven approaches that you can apply to achieve revenue and profit growth in today’s market. Guests: Chris Martin, Founder and President at Atlas Marketing and co-host of Building PA Podcast https://atlasstories.com/ https://buildingpapodcast.com/ Tonya Byrd (Jackson), Business Development Manager at Gilbane Building Company and Vice-Chair of the AGC Business Development (BD) Forum https://www.gilbaneco.com/news-room/press-release/tonya-byrd-joins-gilbane-building-company-to-expand-business-development-strategies-in-georgia/ Resources: AGC Business Development Best Practices (article series) - https://www.agc.org/connect/agc-groups/business-development/business-development-best-practices AGC 2021 Convention Slides - https://convention.agc.org/wp-content/uploads/2021/09/2021-AGC-Convention-1_Challenge-of-the-Chase.pdf AGC BD Forum - https://www.agc.org/connect/agc-groups/business-development-forum #businessdevelopment #clientrelationships #construction #AGCBizDev

Construction firms are coping with a seemingly unending series of supply-chain disruptions that are compounding problems caused by record materials cost increases and pandemic-induced challenges to operations. It has never been more important for project participants to be prepared with strategies to mitigate the risk of material price escalation and delays due to material shortages -- in order to preserve the feasibility and profitability of the project. On this episode, Greg Sweeso of Tarlton Corporation, Jack Mumma of Michigan State University, and Ronald Ciotti of Hinckley, Allen & Snyder LLP share risk mitigation strategies available during the bidding, procurement, and contracting phases of the project. Guests: Greg Sweeso, Project Manager, Preconstruction at Tarlton Corporation https://www.tarltoncorp.com/ Jack Mumma, Construction Contract Administrator, Michigan State University https://ipf.msu.edu/ Ronald Ciotti, Partner at Hinckley, Allen & Snyder LLP https://www.hinckleyallen.com/ Resources: ConsensusDocs Price Escalation Resource Center - https://www.consensusdocs.org/price-escalation-clause/ New COVID-19 Epidemic Contract Rider Helps Guide General Contractors and Subcontractors Through Uncertain COVID-19 Construction Risk Management - https://www.agc.org/industry-priorities/contracts-law/construction-law AGC Construction Inflation Alert - https://www.agc.org/learn/construction-data/agc-construction-inflation-alert AGC 2021 Convention Slides: https://www.agc.org/sites/default/files/Files/Communications/Constructorcast/AGC%202021%20Convention%20Slides.pdf Construction Trends & Outlook: https://www.agc.org/sites/default/files/Files/Communications/Constructorcast/Construction%20trends%20%26%20outlook.pdf

Panel discussion about HBCU Scholarship program between Procore and AGC

Building Inclusive Cultures & Company Success Although inclusive cultures offer clear benefits, companies still struggle with knowing how to cultivate the right culture for all their employees. On this episode, Mark Havens talks about how his organization WMFDP | FDP Global (White Men As Full Diversity Partners) transforms mindsets and behaviors to help organizations sustain truly inclusive cultures. We also talk with President & CEO of Clark Construction Company Sam Clark on how he learned the skills needed to build strong relationships, navigate difficult conversations and become an ally. AGC’s Brynn Huenke shares what AGC is doing to provide companies with training and resources that translate learning to action. Show Notes Guests: Mark Havens Senior Consultant White Men As Full Diversity Partners (WMFDP | FDP Global) https://wmfdp.com/ Sam Clark President & CEO Clark Construction Company https://clarkcc.com/sam-clark/ Brynn Huneke Director, Diversity & Inclusion, Member Engagement Associated General Contractors of America https://buildculture.org/ Culture of CARE Launched in 2020, a partnership between AGC of America and AGC of Washington, Culture of CARE is asking companies to make a public commitment to creating diverse and inclusive workplaces by taking the Culture of CARE pledge. Learn more at www.BuildCulture.org AGC’s Construction Diversity Image Library The Construction Diversity Image Library is a collection of photographs for use by the media featuring diverse individuals in the construction workforce. By making imagery that showcases diversity easy to access for reporters, the library aims to increase representation and empower the industry to appeal to new, diverse talent. https://www.agc.org/construction-diversity-image-library

Contractors may have millions of dollars of equipment, tools and materials stored on their job sites. On this episode, John Wallen of HUB International discusses how to position your firm to best manage the risk of theft. That includes being aware of the coverage details of your insurance policies, taking a multi-layered approach to keeping sites secure and deterring theft, and considering “Internet of Things” (IoT)-based solutions. Also hear tips and best practices on filing a theft report and insurance claim. Guest: John Wallen CPCU, Vice President at HUB International, Wisconsin Construction Industry Practice Leader www.hubinternational.com Resources: Best Practices for Deterring Crime at Construction Sites https://www.constructormagazine.com/best-practices-for-deterring-crime-at-construction-sites/ Solving a Billion-Dollar Problem BEST PRACTICES FOR PREVENTING EQUIPMENT THEFT FROM CONSTRUCTION SITES https://www.constructormagazine.com/solving-a-billion-dollar-problem/ National Insurance Crime Bureau https://www.nicb.org

In part two of this series, we explore how artificial intelligence (AI) can streamline critical construction project workflows by automating time-consuming and repetitive processes like building a submittal log and tracking changes to specs over the course of a project. Bryan Rumple of Mortenson and Sameer Merchant of Autodesk Construction Solutions discuss document management challenges and how AI technology can improve productivity and reduce project risk. Guests: Bryan Rumple, Lead Project Management Controls Engineer at Mortenson https://www.mortenson.com/ Sameer Merchant - VP of product development at Autodesk Construction Solutions https://construction.autodesk.com/ About Pype: https://pype.io/ Pype, part of Autodesk Construction Cloud, is a suite of construction software solutions that use AI and machine-learning algorithms to elevate your efficiency from preconstruction through closeout – specifically for project requirement identification, submittal log creation, and project closeout. About Autodesk Construction Cloud: Autodesk Construction Cloud is a construction project management platform that connects people and data across the building lifecycle, from design through operations.

On this episode, Josh Levy of Document Crunch, Paul James of BOND Brothers and Brian Perlberg of ConsensusDocs dive deep into how AI and Machine Learning are being used to assess contract risk and inform approaches to construction risk management. They discuss finding the right balance using technology versus operational discretion when bidding contracts, negotiating contracts, administrating projects, and managing insurance compliance. Hear their first-hand experiences on how AI powered contract review software for the construction industry can reduce costs, improve efficiencies and lead to a better industry understanding of what is fair and considered a best practice. Guests: Josh Levy, Co-Founder at Document Crunch www.documentcrunch.com Paul M. James, Senior Vice President, Risk Management & General Counsel at BOND Brothers, Inc. https://bondbrothers.com Brian Perlberg, Executive Director and Senior Counsel at ConsensusDocs https://www.consensusdocs.org Document Crunch, curated by legal professionals and risk management experts in the construction industry, harnesses state of-the-art artificial intelligence/machine learning technology to quickly identify what curators believe are the most important provisions in contract documents, and to also provide key insights and rationale, as well as sample contract provisions and other language. Special Offer for ConstructorCast listeners: Register at https://agc.documentcrunch.com/ for • Free Upload ($300 Value) • 10% off All Future Uploads at Document Crunch

On this episode, President and CEO at Gilbane Building Company Mike McKelvy covers everything you need to know about Construction Safety Week 2021 – happening May 3rd through May 7th. Mike shares his excitement to be the chairman of this year’s event and his passion behind the “Holistic Safety” theme; walks through the wealth of planning resources and communication tools that firms can use to participate; and talks about lessons learned, future goals, and how he keeps him team engaged in safety initiatives. Also hear from some Construction Safety Week partners who are offering free training and resources. Kevin Cannon, head of AGC’s safety and health services, ties it all together with what you need to know about OSHA’s National Safety Stand-Down to Prevent Falls in Construction, which is happening the same week. Featured Guests: Michael E. McKelvy, President and Chief Executive Officer at Gilbane Building Company and Chairman of National Construction Safety Week 2021 -- https://www.gilbaneco.com/ Kevin Cannon, Senior Director of Safety & Health Services at AGC of America -- www.agc.org/safety (via email at safety@agc.org) Additional Resources- 1. Construction Safety Week: https://www.constructionsafetyweek.com/ a. Planning Resources: https://www.constructionsafetyweek.com/plan-for-safety-week/ b. Certificate of Participation (via AGC): https://www.surveymonkey.com/r/KYH2BD8 c. Media Coverage Request Form: https://www.surveymonkey.com/r/H8RPZGZ 2. OSHA National Safety Stand-Down to Prevent Falls in Construction: https://www.osha.gov/StopFallsStandDown/ a. Resources: https://www.osha.gov/StopFallsStandDown/resources.html b. Certificate of Participation: https://www.osha.gov/StopFallsStandDown/index.html#cert c. Media Coverage Request Form: https://www.surveymonkey.com/r/H8RPZGZ 3. AGC Construction Safety Week and OSHA Falls Stand-Down Webpage: https://www.agc.org/industry-priorities/safety-health/2021-osha-falls-stand-down-construction-safety-week Here you will find additional information to help you plan your event, including the resources referenced by Procore, Milwaukee and Fastenal in this episode.

As construction continues to be an essential industry in helping our nation’s economic recovery, firms are fighting the growing workforce shortage and looking to recruit more women than ever before. Women are making an impact in the industry by bringing new skill sets, opinions, and experiences into the office and the field – and a diverse workforce leads to stronger companies. Yes, there are certainly challenges. But perceptions and cultures are changing. During “Women in Construction Week 2021,” AGC’s ConstructorCast celebrates the successes and talks about what women have done to further the industry. In this episode, leading women – Lori Dunn-Guion of Swinerton, Maura Hesdon of Shoemaker Construction Co., and Lauline Mitchell of BBI Construction and current NAWIC National VP – share their stories and insights on how to recruit, train and empower women in construction. Listen to find out what attracted them to construction, the skills that have helped them succeed in the industry, and the tools for building a more welcoming, safe, and inclusive workplace. Guests: Lori Dunn-Guion, Division Manager at Swinerton - https://swinerton.com/ Maura Hesdon, General Manager at Shoemaker Construction Co. - https://www.shoemakerco.com/ Lauline Mitchell, Project Manager at BBI Construction - http://www.bbiconstruction.com/ and 2020-2021 NAWIC National Vice President Resources: * All the additional resources shown below can be found on https://www.agc.org/news/2021/03/09/agc-celebrates-women-construction-week U.S. Department of Labor workforce statistics: • Women make up close to 50 percent of the total workforce - https://www.dol.gov/agencies/wb/data/facts-over-time/women-in-the-labor-force#civilian-labor-force-by-sex • Women comprise only 10.9 percent of the current construction workforce - https://www.bls.gov/cps/cpsaat18.htm AGC’s Culture of CARE Sexism in the Workplace Toolkit - https://buildculture.org/make-an-impact/#educate-&-train (consists of three toolbox talks and a discussion guide to help “pledged companies” prepare for and successfully hold discussions with their employees about sexism in the workplace and create actionable next steps following those conversations) Constructor Magazine “How Personal Protection Equipment for Women Pays Off” (March 3, 2021) - https://www.constructormagazine.com/vested-interest/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+ConstructorMagazine+%28Constructor+Magazine%29 National Association of Women in Construction (NAWIC) Home Page - https://www.nawic.org AGC/NAWIC Partnering Agreement - https://www.nawic.org/nawic/Partners.asp Block Kids Building Competition / NAWIC Education Foundation - https://nef-edu.org/home-page/k-12-education/block-kids-building-competition/ NAWIC Emerging Professionals Committee - https://www.facebook.com/EPNAWIC/ (email at ep@nwic.org) Mentoring Young Women in Construction (MyWIC) Philadelphia - https://nawicphl.org/mywic Shoemaker Construction Co. Wins AGC Diversity & Inclusion Award (May 5, 2019) - https://gbca.com/agc-news-resources/shoemaker-construction-co-wins-agc-diversity-inclusion-award/ GBCA’s Construction Leadership Council (CLC) Coffee Chat with Maura Hesdon of Shoemaker Construction Co. - https://gbca.com/uncategorized/clc-coffee-chat-with-maura-hesdon-of-shoemaker-construction-co/ Swinerton Equity & Inclusion - https://swinerton.com/who-we-are/equity-inclusion/ Swinerton Empowering Women in Construction (Blog) - https://swinerton.com/blog/empowering-women-in-construction/

The Protect the Right to Organize (PRO) Act bill now making its way through Congress attempts to overturn decades of federal policy. Despite its name, the PRO Act does much more than protect an employee’s right to organize and engage in collective bargaining. In fact, the PRO Act would expand the economic weapons available to unions at the bargaining table, at the workplace, and beyond. While the union-favoring legislation presents obvious concerns for open-shop contractors, union contractors may not realize the detrimental impact it could have on them. AGC’s CEO Stephen Sandherr explains on this episode exactly HOW and WHY this bill has potential to cause significant disruption in the construction industry, both for firms and the workers they employ, and upset the delicate balance of rights and restrictions established over decades by the NLRB, courts, and Congress. AGC of America Opposes the misleadingly named “Protecting the Right to Organize” (PRO) Act because it will dangerously wreck the balance between an employee's right to bargain collectively and an employers' right to manage their business. Learn more: https://www.agc.org/protecting-right-organize-pro-act Take action: https://advocacy.agc.org/proact Additional Information: The PRO Act legislation contains provisions that are of particular concern to union contractors, see AGC’s 10-page white paper titled The PRO Act: What Union Contractors Need to Know - https://www.agc.org/sites/default/files/Files/Communications/PRO_Act_White_Paper.pdf Companion one-pager: Impact or PRO Act on Union Contractors - https://www.agc.org/sites/default/files/Files/Advocacy/PROACTunionimpact.pdf PRO Act – Labor Law Reform Legislation Introduced in Congress (Feb. 11, 2021) via AGC News - https://www.agc.org/news/2021/02/11/pro-act-%E2%80%93-labor-law-reform-legislation-introduced-congress AGC Statement: New “PRO Act” Will Hurt Construction Workers, Undermine Their Privacy And Make It Hard For The Economy To Recover, Official Warns - https://www.agc.org/news/2021/02/04/new-%E2%80%9Cpro-act%E2%80%9D-will-hurt-construction-workers-undermine-their-privacy-and-make-it

This episode highlights some of the more unique and innovative aspects of how construction firms have adapted their operations and established new work routines to mitigate against the spread of the virus – so they can continue to work in a SAFE and ESSENTIAL manner. Learn from your peers as you hear Frank Baxter (Skanska USA Building), Mayone Sallows (Butz Family of Companies) and Felipe Serrano (The Beck Group) share how they are making use of technology advancements as well as some rudimentary systems to shift behaviors and change practices during the COVID-19 pandemic. Guests: Frank Baxter | EHS Director | Skanska USA Building -- https://www.usa.skanska.com/ Mayone Sallows | Safety Coordinator | Butz Family of Companies -- https://www.butz.com/ Felipe Serrano | Assistant Project Manager | The Beck Group -- https://www.beckgroup.com/ AGC’s COVID-19 webpage at https://www.agc.org/coronavirus shows how the construction industry is protecting workers and the public. From there you can access the association’s https://workingsafe.agc.org site that highlights examples of safety plans and special safety stand-downs designed to make sure every employee knows and follows new COVID-19 guidelines. AGC also features short safety tips (in English and Spanish) and pictures to illustrate how contractors across the country are routinely practicing social distancing, adding more hand sanitizing stations, and disinfecting projects more frequently, for example -https://workingsafe.agc.org/weekly-safety-tips/. Related Resources “How Is the Pandemic Driving Documentation Technology Usage in Construction?” by Grant Hagen, Virtual Design and Construction Manager, The Beck Group appeared in the Associated General Contractors of America Tech Brief - https://www.naylornetwork.com/ngc-nwl/articles/index-v3.asp?aid=637206&issueID=71021 (September 2020) AGC Project Innovation & Delivery Forum – Volunteer Opportunity: The mission of the forum is to align the execution of construction projects with the latest innovations in safety, quality and productivity, and to educate the industry on best practices in order to deliver quality projects on time and on budget. Visit www.agc.org/projectdelivery to learn more and to join the forum.

There’s real potential that we will be printing large concrete buildings in the future. But on this episode, Ryan Shults of Gilbane Building Company and Steven Koehler of Linbeck hope to convince you that contractors can easily benefit from Desktop 3D printing technology right now. They share how they are using 3D printing in various construction applications to help them get, plan and execute projects. Guests: Ryan Shults | VDC Manager | Gilbane Building Company - https://www.gilbaneco.com/ Steven Koehler | VDC Coordinator | Linbeck - https://www.linbeck.com/ AGC Project Innovation & Delivery Forum – Volunteer Opportunity: AGC members can also join the Project Innovation & Delivery Forum. The mission of the forum is to align the execution of construction projects with the latest innovations in safety, quality and productivity, and to educate the industry on best practices in order to deliver quality projects on time and on budget. Visit www.agc.org/projectdelivery to learn more and to join the forum.

The 2021 competition is now open for one of the country’s most rigorous business safety competitions – AGC’s Construction Safety Excellence Awards (CSEA), sponsored by Willis Towers Watson. This episode highlights AGC-member Faith Technologies – the 2020 Grand Award Winner. Faith’s CEO Mike Jansen and their VP of Safety Rocky Rowlett talk about their safety program, their video series called Charged! and share some of their very own best safety practices. Also hear WTW’s Construction Safety and Risk Control Leader Mike Fredebeil discuss an incredible additional benefit of the safety excellence awards: the annual publication of a free document that includes hundreds of “Safety Management Best Practices” gathered from the competing companies’ submissions. AGC’s safety lead Kevin Cannon fills in all the details so you know how to get involved and benefit from the sharing of ideas and strategies. Guests: Mike Jansen, CEO at Faith Technologies Rocky Rowlett, Vice President of Safety at Faith Technologies Mike Fredebeil, North American Construction Safety and Risk Control Leader and certified safety professional with Willis Towers Watson Kevin Cannon, Senior Director of Safety and Health Services at AGC of America Additional Resources: • Faith Technologies – https://www.faithtechnologies.com/ • Faith Technologies “Charged!” Video Series – https://www.faithtechnologies.com/news/video-gallery/ The Charged! Videos can also be found on Faith’s company blog https://blog.faithtechnologies.com/ and social media channels, including Facebook, LinkedIn, Twitter and YouTube. • Willis Towers Watson – https://www.willistowerswatson.com/en-US • AGC Construction Safety Excellence Awards – www.agc.org/csea o 2021 CSEA application o AGC WebEd: Overview of the 2021 CSEA – Thu, Oct. 22, 2020 at 2:00 PM ET - REGISTER: https://register.gotowebinar.com/register/3457861124914414094 o CSEA Safety Management Best Practices (see right sidebar for links to 2017 – 2020 reports)

Since the start of the pandemic, the construction industry has shed more than 400,000 jobs as demand for projects has stalled in many parts of the country. In this episode, Ken Simonson, AGC’s chief economist; Allison Scott, Autodesk’s Director of Construction Thought Leadership and Customer Marketing; and Steven Sandherr, the chief executive officer of the Associated General Contractors of America will talk about the key findings of the 2020 Construction Workforce Survey, observations about how the coronavirus is impacting the sector’s productivity and what AGC will be doing to support the construction industry going forward. Full report of the 2020 AGC Construction Workforce Survey and Fact Sheets by State: https://www.agc.org/news/2020/09/02/coronavirus-has-caused-significant-construction-project-delays-and-cancellations-yet

Generation Z will be the future of construction work as baby boomers retire and a new crowd of young people enter the industry. On this episode, an 18-year old Gen Z expert Josh Miller and two AGC student chapter leaders Anna Bennett and Tyler Korte offer authentic insights on how to leverage their unique skills to improve your business. Discover how to target your construction firm’s training and recruiting strategies to better engage with the 16 to 24-year old demographic. Speaker profiles: Josh Miller, Northwestern University – Medill School of Journalism; former director of Gen Z studies at XYZ University (Jan 2018 – July 2020) Anna Bennett, University of Louisiana at Monroe Tyler Korte, Crossland Heavy Contractors, Inc. Field Engineer; Pittsburg State University (Class of 2020 – Construction Engineering Technology)

On this special episode, AGC’s Senior Director of Safety and Health Services, Kevin Cannon and Director of Safety and Health Services, Nazia Shah, showcase the events scheduled for September 14-18, 2020, (Construction Safety Week and OSHA’s Fall Safety Stand-down) and how contractors and their partners can take this opportunity to recommit to sending every worker home safe each day. Find out how to participate, access online materials and best practice resources, and be recognized for your efforts. RESOURCES 1. Construction Safety Week: https://www.constructionsafetyweek.com/ • Resources: https://www.constructionsafetyweek.com/plan-for-safety-week/ • Certificate of Participation (via AGC): https://www.surveymonkey.com/r/2V7ZLP2 • Media Coverage Request Form: https://www.surveymonkey.com/summary/9bg7gA4eWUXCdgP_2BrNCDb3DF5ZYzqHnAjhb0Tvo9qF8A8obQFe9iQmazK1DWRREp 2. OSHA National Safety Stand-Down to Prevent Falls in Construction: https://www.osha.gov/StopFallsStandDown/ • Resources: https://www.osha.gov/StopFallsStandDown/resources.html • Certificate of Participation: https://www.osha.gov/StopFallsStandDown/index.html#cert If you have further questions about these two events, please email us at safety@agc.org.

On this episode of ConstructorCast, we feature three AGC member companies that are pioneering tech solutions to challenges faced daily by the industry. As a result, they were named the 2020 winners of the AGC Construction Innovation Award. Listen and be inspired by their creations. Guests: Anne Brown -- “CopperWorks” by Christman Constructors Inc. Christman Constructors developed a tool called CopperWorks – which is an iOS-based (or mobile) application that brings job-placement logistics into the 21st century. https://www.christmanconstructors.com/ www.copperworks.app VIDEO: https://vimeo.com/370152701/650d17a7e0 Eric E. Cylwik -- “Slab Former” by Sundt Construction Sundt Construction’s creation called Slab Former uses technology to automate means and methods to prefabricate concrete edge forms around a slab, saving contractors time, labor and money. https://www.sundt.com/ VIDEO: https://www.youtube.com/watch?v=7CiV43oCgpE&feature=youtu.be Susan Heinking -- “Net Zero Trailer” by Pepper Construction Pepper Construction built the Net Zero Trailer – which turned out to be a more comfortable and energy efficient space that also improves jobsite sustainability. https://www.pepperconstruction.com/ https://www.pepperconstruction.com/stories/ideation-net-zero-trailer VIDEO: https://pepperconstruction.wistia.com/medias/va8x1jbsuf Congratulations to our 2020 AGC Construction Innovation Award Winners – https://www.youtube.com/watch?v=pwSseDQJF9U&feature=youtu.be. Spotlight Your Achievements! AGC Launches 2021 Awards Season: In 2018, AGC of America celebrated 100 years of serving the construction industry. While we celebrated and recognized the past it is important that we continue to look to the future to address ongoing issues affecting the industry. In this spirit, AGC decided to make the Innovation Awards an annual award to incentivize and encourage free thinkers to provide pioneering solutions to industry challenges. Apply by Wednesday, October 21, 2020 for full consideration. Learn more about AGC of America's awards programs at www.agc.org/awards. AGC Project Innovation & Delivery Forum – Volunteer Opportunity: AGC members can also join the Project Innovation & Delivery Forum. The mission of the forum is to align the execution of construction projects with the latest innovations in safety, quality and productivity, and to educate the industry on best practices in order to deliver quality projects on time and on budget. Visit www.agc.org/projectdelivery to learn more and to join the forum.

The weather is consistently rated as one of the most frequent and harmful causes of construction project delays. Weather-related claims are also a frequent source of dispute between contractors and project owners. On this episode, Athenium Analytics explains how contractors, their risk management departments, and even their insurance carriers can use hyper-local forecasts as well as historical weather data to manage and mitigate delays, lost weather days, and onsite damages from natural hazards. Tool for Contractors: Protect your team, materials and timeline against weather-related risks. GaugeConstruction is the cloud-based weather analytics dashboard for the construction and business sectors, delivering short-term, long-term and post-event weather insights during every phase of your project – including hyperlocal forecasts, lightening alerts and analysis. You can also configure custom alerts for future weather events that may pose a threat to worker and site safety, based on the location and phase-specific needs for each project. AGC members receive an exclusive 30% discount on GaugeConstruction – sign up using your AGC member ID. Find out more on the AGC Member Benefits Web page https://www.agc.org/member-benefits/ (click Member Discounts).

Our country is in desperate need of significant infrastructure investments. Tell Congress and President Trump to advance the $1.5 trillion infrastructure bill! The Moving Forward Act (H.R. 2) provides resources to build roads and bridges, public transit, airports, schools, hospitals, affordable housing, water infrastructure, locks, dams, levees and more. With 1,187,000 construction workers unemployed, and an increasing number of construction firms reporting cancelled or delayed projects, our elected leaders must act now to protect existing -- and create new -- construction jobs! In this episode, AGC’s VP of Gov’t Relations Jimmy Christianson lays out how the proposed House infrastructure package would provide needed investments in a broad range of aging infrastructure and support economic recovery by promoting demand for new construction careers, equipment and materials. Listen to find out how you can tell Congress and President Trump to enact the “Moving Forward Act” to combat the threat of more project delays and worker layoffs. Resources: Get Involved: www.advocacy.agc.org Take Action: https://advocacy.agc.org/moving_forward_act AGC Highlights of H.R. 2, the Moving Forward Act: https://bit.ly/2Bdc11M

Get the key facts on how the Paycheck Protection Program Flexibility Act of 2020 makes significant improvements to the original program that will allow businesses more flexibility in using their loan funds. AGC’s tax, fiscal affairs and accounting expert Matt Turkstra walks through the notable changes regarding how borrowers can spend the funds, and how long they can take to spend the funds, and still qualify for loan forgiveness. This episode also covers new safe harbors for hiring or rehiring qualified employees, as well as changes in the terms of the loan and the repayment timing of any unforgiven loan amounts. NOTES: Visit AGC coronavirus Web page for the latest news and information -- www.agc.org/coronavirus.

In this episode, three “Lean” practitioners and advocates share their personal stories on how to increase Lean engagement on construction jobsites to reduce waste, improve workflow and add value for project stakeholders. Hear Henry Nutt of Southland Industries, Keyan Zandy of Skiles Group, and Joe Donarumo of Linbeck explain their unique approach to getting earlier and more Lean buy-in from the “boots on the ground” leaders in the field (superintendents and last planners), rather setting Lean performance goals by using a top-down approach. Discover how a “Builder’s Lean” model can produce immediate, positive change on your projects. Guests: Henry Nutt III, Preconstruction/Business Development Manager at Southland Industries Keyan Zandy, Chief Operating Officer at Skiles Group Joe Donarumo, Senior Superintendent & Director of Lean Application at Linbeck Group, LLC All of the additional resources shown below can be found on: https://www.agc.org/news/2020/06/02/new-agc-podcast-episode-lean-construction AGC Lean for Trades Toolbox Series AGC Lean Construction Education Program “Lean, Mean, Building Machines: Understanding and Implementing the Lean Method” by Henry Nutt III appeared in Consulting-Specifying Engineer (December 2019) “The Top 3 Safety Factors Affecting Teams Today” by Henry Nutt III & Dodge Data & Analytics appeared in Construction Business Owner (March 2019) The Lean Builder (book and blog) by Joe Donarumo & Keyan Zandy online AGC 2020 Convention PowerPoint Presentation: “A Blueprint for Builder’s Lean: Six Simple Steps for the Field to Follow” by Joe Donarumo & Keyan Zandy (March 2020) COVID-19 Information: Southland Industries “A3” Factsheet: “COVID-19 Response–Lean Mitigation, Best Practices that Can Keep Workers Safe and Productive” by Henry Nutt III, Andy Rhodes & Natasha Schnaitman (last updated May 11, 2020, V1.0) The Lean Builder blog: “The Daily Huddle – COVID-19 Protocol” by Keyan Zandy (April 6, 2020) The Lean Builder blog: “3 Ways to Pull Plan during the COVID-19 Pandemic” by Keyan Zandy (April 21, 2020)

The COVID-19 pandemic has had a dramatic impact on AGC educational programs. Since mid-March, all of AGC’s live events have been postponed or we’ve looked for a way bring the same caliber of information to contractors in a virtual format. On this episode, AGC staff goes over the changes AGC has made to move our programs and events online, including the upcoming Federal Contractors Virtual Conference (https://fedcon.agc.org/) and Construction Safety, Health & Environmental Virtual Conference (https://shec.agc.org/).

AGC’s Culture of CARE initiative is challenging leaders to take a bold and visible step towards ensuring their workplaces are welcoming, safe and inclusive for an increasingly diverse and talented pool of workers. On this episode, our guests share how this important program got started, how it’s growing, how it’s benefiting contractors in the AGC family, and how more contractors can sign the pledge and get started. Guests: Pastor Lawrence Willis, Urban League Seattle - https://urbanleague.org/ Shannon Gustine, Hensel Phelps - https://www.henselphelps.com/ Kari Karst, BX Civil & Construction - https://www.bx-cc.com/ Visit the website www.BuildCulture.org to find out how your company can take the Culture of CARE pledge. Companies that sign the pledge, are able to take advantage of the many online tools and resources to help them establish a Culture of CARE in their workplaces. These include hardhat stickers, jobsite posters, toolbox talks, sample company policies as well as tips and best practices.

On this episode, we talk with senior AGC staff about Congress’ next coronavirus relief funding proposal, expected policy disagreements, AGC’s top priorities, and the great deal of outreach and advocacy work that the association is doing to keep workers safe and keep construction going. NOTE: As of press time, House Democrats released their recovery bill, and AGC is working on its analysis of the measure.

COVID-19 has led to a surge of project cancellations and shut down construction almost entirely in some states, as per AGC’s coronavirus survey results. In this episode, Ali Mills from Plum Contracting Inc., talks about how the new federal Paycheck Protection Program has made a meaningful difference for her company, allowing her to rehire and retain employees and endure the construction stop order in Pennsylvania. As construction is given the green light in PA on May 1, Ali anticipates all her employees will be back to full salary, a story that she will also share at a press conference at the White House today.

On April 23, the U.S. Department of the Treasury issued new and troubling guidance on the Paycheck Program. This guidance recasts one of the several vague certifications that borrowers have to make, suggesting that it requires borrowers to prepare themselves “to demonstrate” that, at the time they applied for the loan, that they did not have access to enough other “sources of liquidity” to support their ongoing operations. In this episode, two partners in one of Washington’s most prominent law firms, Crowell & Morning, put the new guidance into context and explain how borrowers should respond to it, including the potentially severe consequences of not assembling the documentation they might need. This information is significant as AGC’s Chief Economist reports that a large share of construction firms have received loan funds, allowing contractors to add and retain employees, as evidenced by AGC’s latest survey results.

In this episode, AGC explains key changes in Version 3.0 of the feds guidance for identifying the “Essential Critical Infrastructure Workforce,” which state/local governments may use to decide what construction activities may continue during the pandemic. Recognizing that many firms are struggling to retain their crews, we update you on the federal Paycheck Protection Program that ran out of funding last week, and what relief small business contractors can expect in the near term. Also this week, Congress is expected to release a Water Resources Development Act (WRDA) reauthorization bill; listen as AGC shares its top priorities and key polices to protect the nation from floods and keep our waterways open to navigation.

Today, our host Leah Pilconis talks with Cory Gattie about how AGC of America is making infrastructure a key part of our economic recovery suggestions as we work with Congress and the Trump administration to rebuild the economy. Leah also talks with AGC’s Brynn Huneke about how the association’s new Culture of CARE program can help firms and workers as they cope with the challenges of COVID-19. Learn more about our Culture of CARE at www.buildculture.org.

The harsh reality is that 30 years of work can be destroyed in 30 seconds. It's difficult enough to plan for things that are happening, much less the things that might happen. But statistics show your company will, at some point, face a crisis situation of some type. Preparation is key to ensuring a professional and prompt response for your workers, customers/clients and the public. On this episode, Anthony Huey, president of Reputation Management and creator of CrisisDriver, shares communication tips, techniques and tools that any construction firm can use before, during and after any unfortunate incident to protect their hard-earned image and reputation. Anthony Huey, President at Reputation Management, LLC https://www.communicateclearly.com/ CrisisDriver -- An industry-focused incident response software solution that enables companies to quickly and efficiently respond to and manage negative events; learn more at https://www.agc.crisisdriver.com. Find additional tools and resources on AGC’s Crisis Response and Communication Resources Web Page: https://risk.agc.org/crisis-response-resources/

This episode of ConstructorCast COVID-19 Special Edition offers a preview of the week ahead, including more details on the April 9th National Coronavirus Safety Stand Down and the steps AGC of America is taking to get the Small Business Administration to fix the qualification guidelines for its new Paycheck Protection Program loans so that all construction firms that employ 500 or fewer people can qualify.

Construction firms are vulnerable to many forms of cyberattack, including social engineering, ransomware attacks, wire fraud, and hacking. On this episode, Nikki Ingram, a cybersecurity risk engineer with Zurich North America, talks about what you need to look out for and shares some tips and preventative measures that will help contractors protect themselves. Nikki also presented a breakout session on cyber risks at AGC’s 2020 Annual Convention in Las Vegas. Link to her PowerPoint: https://bit.ly/39wmwIF Additional Resources: AGC of America has several on-demand webinar recordings covering cyber issues for contractors. Check out the collection on AGC’s Risk Management WebEd and Podcast Recordings page (https://www.agc.org/industry-priorities/risk-management/risk-management-webed-and-podcast-recordings), which includes: • New Cybersecurity – New Mandatory Requirements for Defense Contractors • New FAR and DFARS Cybersecurity Requirements for Federal Contractors - What You Need to Know • Wire Transfer Fraud: Understanding and Insuring the Risk Zurich’s Cyber Liability Risk Management Web page: https://www.zurichna.com/insurance/cyber National Institute of Standards and Technology Framework for Improving Critical Infrastructure Security (NIST Cybersecurity Framework) -- This voluntary Framework consists of standards, guidelines and best practices to manage cybersecurity risk, online at https://www.nist.gov/cyberframework.

There is so much going on in Washington DC, especially the last two weeks. We brought together our team of lobbyists who have been worked to help craft the coronavirus relief bill that is set for a vote as early as today (March 27, 2020) in the House. They provided an analysis of what is in the measure and how it could help the construction industry.

Natural Disaster Impacts on Construction Projects – PART 2: In this final episode, our expert panel explores how to navigate through a complex property and/or business interruption claim, common insurance policy coverage issues, and strategies to full recovery after a natural disaster. Check out Part 1 for best practices on preparing for and mitigating the impacts of a natural disaster. Speakers: Tracy Alan Saxe, Partner at Saxe Doernberger & Vita, P.C. www.sdvlaw.com Frank Russo, Founder/Principal at Procor Solutions + Consulting www.procorllc.com Joseph Poliafico, Global Director Insurance & Risk Management at Interstate Restoration www.interstaterestoration.com Read more or listen to Part 1 here: https://www.agc.org/news/2019/12/18/new-constructorcast-episode-natural-disaster-impacts-construction-projects-–-part-1

We kick-off this two-part series discussing how natural disasters affect construction; pre-loss planning; lessons learned in mitigating losses – including insurance considerations before the event; and challenges in restoration and resumption of business operations, immediately post-impact. Stay tuned for Part 2 for expert advice on how to present a natural disaster claim for insurance recovery. Listen in as three experts in claims management, litigation and restoration discuss how they have worked through these tough issues and offer their advice on how you can do the same. Speakers: Tracy Alan Saxe, Partner at Saxe Doernberger & Vita, P.C. www.sdvlaw.com Frank Russo, Founder/Principal at Procor Solutions + Consulting www.procorllc.com Joseph Poliafico, Global Director Insurance & Risk Management at Interstate Restoration www.interstaterestoration.com Read more: https://www.agc.org/news/2019/12/18/new-constructorcast-episode-natural-disaster-impacts-construction-projects-–-part-1

On the latest episode of AGC’s ConstructorCast, we talk with two leading economists covering the construction sector: Ken Simonson, chief economist for AGC, and Kermit Baker, chief economist for the American Institute of Architects. Don’t be put off by their titles, though—these guys speak English! Ken and Kermit provide a fast-paced overview of what to expect in the coming year for different categories of construction spending, labor availability and materials costs. They assess the broader economic environment and how various changes in economic growth or policy could affect contractors. To receive the Data DIGest, Ken’s one-page weekly summary of economic news relevant to construction, email him at ken.simonson@agc.org. Visit AGC’s website at https://www.agc.org/learn/construction-data for construction-specific data and economic information. Access AIA’s business intelligence resources here: https://www.aia.org/business-intelligence.

In this episode of AGC’s ConstructorCast, we talk with virtual design and construction (VDC) leaders from Barton Malow Company(www.bartonmalow.com), Matt Hedke and Alan Todd, about the benefits of VDC, technology selection and how to ensure successful companywide integration. Barton Malow defines VDC as the application of BIM and related technology throughout the project lifecycle (pursuit to closeout) to improve overall project performance. Barton Malow shares how it picks the right tools -- and how it uses technology to continually improve safety, quality and productivity during construction. Listen and learn how the company’s VDC team partners with project delivery teams, including design and trade partners, to ensure they are trained to use the technologies that can best help them plan and execute the work on their projects. View Barton Malow’s VDC Quarterly Reports (https://www.bartonmalow.com/VDC-quarterly-reports) on the benefits of VDC and how it adds value to the owner. Join the more than 1,000 AGC members who have earned their CM-BIM credentials; complete AGC of America’s BIM education program – www.agc.org/BIM.

On the latest episode of the ConstructorCast, we speak with two industry experts on how construction firms can best prepare for and handle the aftermath of a crisis. We discuss the logistical implications of crisis preparedness as well the imperative to address the psychological and emotional repercussions of job site accidents. Access more resources here: https://meetings.agc.org/risk/crisis

In this episode we explore how the construction industry's risk environment is evolving and what it means for your business. Ryan Howsam, Principal at FMI Corporation, explains the results of the AGC/FMI 2019 Risk Study, highlighting key trends and takeaways. View the survey results here: https://www.agc.org/industry-priorities/risk-management/reports-hot-topic-papers

ConstructorCast: Technology Changing the Construction Industry by AGC of America

ConstructorCast: AGC 100th Convention Highlights by AGC of America

ConstructorCast: How to Advance Your Career by AGC of America

ConstructorCast: OSHA Crane Operator Evaluation Requirement by AGC of America

ConstructorCast: How To Train Construction Supervisors by AGC of America

ConstructorCast: Lean by AGC of America

ConstructorCast: The 2018 Elections by AGC of America

Additional resources Constructor Magazine article: https://www.constructor-digital.com/ngcs/july_august_2018/MobilePagedArticle.action?articleId=1408816#articleId1408816 The Center for Construction Research and Training website: https://www.cpwr.com/research/opioid-resources Suicide, Addiction, and Mental Health toolbox talk: https://www.agc.org/sites/default/files/Files/Communications/Toolbox%20Talk%20SAMH.PDF

Read the survey results and analysis here: https://www.agc.org/news/2018/08/29/eighty-percent-contractors-report-difficulty-finding-qualified-craft-workers-hire

ConstructorCast: The Education and Research Foundation by AGC of America

ConstructorCast: Infrastructure Funding Update by AGC of America

ConstructorCast: Looking Back On 100 Years by AGC of America

How Steel & Aluminum Tariffs Hurt Construction by AGC of America

ConstructorCast: Dealing with Legalized Marijuana by AGC of America

ConstructorCast: Trump's Infrastructure Plan by AGC of America

ConstructorCast: Working At The Local Level by AGC of America

ConstructorCast: Where We Are With Tax Reform by AGC of America

Streamlining Environmental Permitting in Construction by AGC of America

ConstructorCast: Men Without Work by AGC of America

ConstructorCast: Diversity & Inclusion in Construction by AGC of America

ConstructorCast: What You Don't Know About Safety Could Kill You by AGC of America

ConstructorCast: Construction's Case for Immigration Reform by AGC of America

ConstructorCast: Why Construction Needs Standard Form Contracts by AGC of America

ConstructorCast: Construction Policy & the New Congress by AGC of America

ConstructorCast: What Trump Could Mean for Construction by AGC of America

For this episode, we sit down with Jimmy Christianson, AGC's Regulatory Counsel, for the full story on how OSHA's rule may prevent companies from using post-incident drug and alcohol testing, what contractors need to know about compliance, and what AGC is doing to stop the rule. UPDATE (10/21): https://www.agc.org/news/2016/10/21/osha-delays-rule-enforcement-related-post-incident-drug-testing-position UPDATE (10/24): https://www.agc.org/news/2016/10/24/agc-efforts-help-move-osha-modify-controversial-drug-testing-position

ConstructorCast: Cyber Security by AGC of America

ConstructorCast: Multiemployer Pension Reform by AGC of America

ConstructorCast: OSHA's Silica Rule by AGC of America

ConstructorCast: 2016 Elections by AGC of America