This is an audio podcast for woodworkers, by woodworkers. A light-hearted look at the latest news, tips, and tricks from the world of woodworking. Sit back, relax, and grab your favorite beverage because its time to talk woodworking.
WT565_Hating_on_Harvey
WT565_Hating_on_Harvey by Wood Talk | Woodworking
1/10/2024 • 1 hour, 13 minutes, 50 seconds
WT564
WT564 by Wood Talk | Woodworking
12/20/2023 • 46 minutes, 10 seconds
WT563_Jesus_Cremona
WT563_Jesus_Cremona by Wood Talk | Woodworking
12/13/2023 • 48 minutes, 32 seconds
WT562 Matt Hates Podcasts
WT562 Matt Hates Podcasts by Wood Talk | Woodworking
WT411 - Matt with Feathers and Essential Oils by Wood Talk | Woodworking
9/25/2017 • 58 minutes, 58 seconds
WT410 - Bouncing Down the Dado
WT410 - Bouncing Down the Dado by Wood Talk | Woodworking
9/18/2017 • 37 minutes, 21 seconds
WT409 - At Least We Didn't Quit
WT409 - At Least We Didn't Quit by Wood Talk | Woodworking
9/11/2017 • 54 minutes, 38 seconds
WT408 - Working with Others in Your Shop
WT408 - Working with Others in Your Shop by Wood Talk | Woodworking
9/8/2017 • 17 minutes, 20 seconds
WT407 - Woe Is Us
WT407 - Woe Is Us by Wood Talk | Woodworking
9/4/2017 • 58 minutes, 31 seconds
WT406 - Upgrade the Bandsaw or Buy it New
WT406 - Upgrade the Bandsaw or Buy it New by Wood Talk | Woodworking
8/11/2017 • 8 minutes, 44 seconds
WT405 - Cremona Totem Pole
WT405 - Cremona Totem Pole by Wood Talk | Woodworking
8/7/2017 • 1 hour, 17 minutes, 33 seconds
WT404 - Kids and the Trades
WT404 - Kids and the Trades by Wood Talk | Woodworking
8/3/2017 • 12 minutes, 23 seconds
WT403 - Matt Rips Chain
WT403 - Matt Rips Chain by Wood Talk | Woodworking
7/31/2017 • 1 hour, 9 minutes, 54 seconds
WT402 - Our Average Work Week
WT402 - Our Average Work Week by Wood Talk | Woodworking
7/28/2017 • 13 minutes, 56 seconds
WT401 - Please Sir May I Have a Blanket Chest
WT401 - Please Sir May I Have a Blanket Chest by Wood Talk | Woodworking
7/24/2017 • 44 minutes, 51 seconds
WT400 - What NOT to Do in the Shop
WT400 - What NOT to Do in the Shop by Wood Talk | Woodworking
7/21/2017 • 12 minutes, 14 seconds
WT399 - Poops McDomino
WT399 - Poops McDomino by Wood Talk | Woodworking
7/17/2017 • 49 minutes, 54 seconds
WT398 - What Makes Us So Happy
WT398 - What Makes Us So Happy by Wood Talk | Woodworking
7/14/2017 • 22 minutes, 29 seconds
WT397 - Rehydrated Poop Nuggets
WT397 - Rehydrated Poop Nuggets by Wood Talk | Woodworking
7/10/2017 • 53 minutes, 5 seconds
WT396 - Who Is the Average Woodworker
WT396 - Who Is the Average Woodworker by Wood Talk | Woodworking
7/6/2017 • 13 minutes, 6 seconds
WT395 - The Professional Show
WT395 - The Professional Show by Wood Talk | Woodworking
7/3/2017 • 1 hour, 2 minutes, 45 seconds
WT394 - Do You Cut Stored Lumber to Length?
WT394 - Do You Cut Stored Lumber to Length? by Wood Talk | Woodworking
6/30/2017 • 11 minutes, 29 seconds
WT 393- A 2x4 isn't 2x4?!
WT 393- A 2x4 isn't 2x4?! by Wood Talk | Woodworking
6/26/2017 • 59 minutes, 53 seconds
WT392 - Measure Once, Cut Six Times
WT392 - Measure Once, Cut Six Times by Wood Talk | Woodworking
6/22/2017 • 9 minutes, 17 seconds
WT391 - Shannon Gets Kicked Off The Show
WT391 - Shannon Gets Kicked Off The Show by Wood Talk | Woodworking
6/19/2017 • 44 minutes, 59 seconds
WT390 - Parenting & Making Stuff
WT390 - Parenting & Making Stuff by Wood Talk | Woodworking
6/15/2017 • 20 minutes, 21 seconds
WT389 - Bob Likes to Make Stuff
WT389 - Bob Likes to Make Stuff by Wood Talk | Woodworking
6/12/2017 • 44 minutes, 35 seconds
WT388 - Wood Movement and Wood Thickness
On today's weekend show we talking about the wood movement and veneer thickness.
William wrote in with this to say:
Try to contain your excitement as I present to you your 10,000th wood movement question. I've seen several people make small table tops by veneering relatively thick strips (1/4"-1/2") of wood to plywood or particle board, in effect flipping the bird to conventional wisdom about the wood expanding or failing later. I can see this working on thinner stock but I wondered if there was a magic number of thickness that should probably be considered the threshold for such an application? Would species make much difference?
6/8/2017 • 13 minutes, 37 seconds
WT387 - Marc Likes 'Em Curvy and Complicated
WT387 - Marc Likes 'Em Curvy and Complicated by Wood Talk | Woodworking
6/5/2017 • 59 minutes, 32 seconds
WT386 - Taking on Projects Above Your Skill Level
WT386 - Taking on Projects Above Your Skill Level by Wood Talk | Woodworking
6/1/2017 • 17 minutes, 32 seconds
WT385 - Two Horny Wolves
WT385 - Two Horny Wolves by Wood Talk | Woodworking
5/29/2017 • 48 minutes, 43 seconds
WT384 - Tool Acquisition Disorder
WT384 - Tool Acquisition Disorder by Wood Talk | Woodworking
5/25/2017 • 22 minutes, 50 seconds
WT383 - Choke Up On It!
WT383 - Choke Up On It! by Wood Talk | Woodworking
5/22/2017 • 1 hour, 12 minutes, 40 seconds
WT382 - Are Your Projects Art?
WT382 - Are Your Projects Art? by Wood Talk | Woodworking
5/19/2017 • 15 minutes, 17 seconds
WT381 - Stick it in the Wood!
WT381 - Stick it in the Wood! by Wood Talk | Woodworking
5/15/2017 • 1 hour, 10 minutes, 34 seconds
WT380 - Would You Still Work the Same Way?
WT380 - Would You Still Work the Same Way? by Wood Talk | Woodworking
5/5/2017 • 9 minutes, 36 seconds
WT379 - Pooping in the Slop Sink
WT379 - Pooping in the Slop Sink by Wood Talk | Woodworking
5/1/2017 • 50 minutes, 39 seconds
WT378 - Should You Join a Guild?
WT378 - Should You Join a Guild? by Wood Talk | Woodworking
4/28/2017 • 12 minutes, 46 seconds
WT377 - Matt Would Tap That
WT377 - Matt Would Tap That by Wood Talk | Woodworking
4/24/2017 • 51 minutes, 35 seconds
WT376 -What is Our Endgame?
WT376 -What is Our Endgame? by Wood Talk | Woodworking
4/21/2017 • 13 minutes, 28 seconds
WT375 - We Want Mo Mona
WT375 - We Want Mo Mona by Wood Talk | Woodworking
4/17/2017 • 34 minutes, 54 seconds
WT374 - Woodworking Vacation
WT374 - Woodworking Vacation by Wood Talk | Woodworking
4/14/2017 • 8 minutes, 22 seconds
WT373 - Axial Tilt of Siberian Lurch
WT373 - Axial Tilt of Siberian Lurch by Wood Talk | Woodworking
4/11/2017 • 58 minutes, 18 seconds
WT372 - Safety Tips We Don't Follow
WT372 - Safety Tips We Don't Follow by Wood Talk | Woodworking
4/7/2017 • 10 minutes, 40 seconds
WT371 - 10 Years of Madness!
WT371 - 10 Years of Madness! by Wood Talk | Woodworking
4/4/2017 • 1 hour, 7 minutes, 14 seconds
WT370 - Our Sharpening Setups
WT370 - Our Sharpening Setups by Wood Talk | Woodworking
3/31/2017 • 27 minutes, 23 seconds
WT369 - Marc Leaves the Show
WT369 - Marc Leaves the Show by Wood Talk | Woodworking
3/28/2017 • 48 minutes, 28 seconds
WT368 - Dumbest Things We Have Ever Made
WT368 - Dumbest Things We Have Ever Made by Wood Talk | Woodworking
3/24/2017 • 10 minutes, 15 seconds
WT367 - Matt Loves Us
WT367 - Matt Loves Us by Wood Talk | Woodworking
3/20/2017 • 43 minutes, 53 seconds
WT366 - Total Overkill
WT366 - Total Overkill by Wood Talk | Woodworking
3/17/2017 • 13 minutes, 13 seconds
WT365 - Furry Bottomed Woodworking
WT365 - Furry Bottomed Woodworking by Wood Talk | Woodworking
3/14/2017 • 58 minutes, 9 seconds
WT364 - Pricing Lumber
WT364 - Pricing Lumber by Wood Talk | Woodworking
3/10/2017 • 23 minutes, 21 seconds
WT363 - Hot Garbage Woodworking
WT363 - Hot Garbage Woodworking by Wood Talk | Woodworking
3/6/2017 • 38 minutes, 20 seconds
WT362 - Going Out on a Limb
WT362 - Going Out on a Limb by Wood Talk | Woodworking
3/3/2017 • 10 minutes, 39 seconds
WT361 - Artisanal Crotch Wood
WT361 - Artisanal Crotch Wood by Wood Talk | Woodworking
2/28/2017 • 43 minutes, 25 seconds
WT360 - The Maker Movement and it's Effect on Quality
WT360 - The Maker Movement and it's Effect on Quality by Wood Talk | Woodworking
panel movement in a grill stand, concerns over basement humidity, and cutting compound angled tenons.
5/19/2015 • 1 hour, 2 minutes, 50 seconds
WT243 - Where Would You Build Your Woodworking Business?
Where we would locate our woodworking businesses and why.
5/15/2015 • 33 minutes, 24 seconds
WT242 - The Calm and Collected Long Islander
Workbench finishes, rust prevention in the tool cabinet, and whether to wipe away glue when it's wet or dry.
5/12/2015 • 46 minutes, 19 seconds
WT241 - Stuff We Don't Do Well
The one thing in woodworking we are worst at and how we are working to improve it, if at all.
5/8/2015 • 19 minutes, 42 seconds
WT240 - The Snarky Show
Boiled linseed oil before a clear coat, tinting epoxy, and whether to pre-finish edge banding on a plywood box.
5/5/2015 • 55 minutes, 19 seconds
WT239 - Anticipatory Tool Purchases
What tools have you bought with great expectations only to see them collect dust?
5/2/2015 • 10 minutes, 29 seconds
WT238 - Vinegar Pie
Curing finishes in the oven, what size miter saw 10" or 12", and connecting cabinets!
4/28/2015 • 56 minutes, 36 seconds
WT237- How Tools and Techniques Affect Project Choices
How much techniques, materials, and tools impact our choices in projects.
4/24/2015 • 16 minutes, 12 seconds
WT236 - SawStop Sponsored This One
Respirators in the wood shop, tips for staining pine, spraying finish on deep cabinets.
4/20/2015 • 1 hour, 5 minutes, 15 seconds
WT235 - Origin Stories
A show about our personal woodworking histories.
4/17/2015 • 33 minutes, 53 seconds
WT234 - Vanderlist Nachos
jointing away from the fence, choosing a router for a router table, and using floats.
4/14/2015 • 1 hour, 11 minutes, 26 seconds
WT233 - Recovering From Close Calls and Injuries
Our close calls and injuries and how we recovered from them.
4/9/2015 • 22 minutes, 39 seconds
WT232 - Back to Betamax
WT232 - Back to Betamax by Wood Talk | Woodworking
4/7/2015 • 49 minutes, 32 seconds
WT231 - Panel Glueup Techniques
How we glue up panels and how we have changed our technique over the years.
4/2/2015 • 15 minutes, 20 seconds
WT230 - Super Spongy Matt
Anti-fatigue mats, pore-filling, build or buy the first workbench?, wood movement in an Adirondack chair, and shop vac vs dust collector vs air filter!
3/31/2015 • 1 hour, 8 minutes, 39 seconds
WT229 - Small Shop Lessons
Marc was out sick so Matt and Shannon talked about small shops whether they be garage or basement and the lessons we have learned from our own small workshops.
3/27/2015 • 33 minutes, 42 seconds
WT228 - Marc Has The Sniffles
Sharpening router plane blades and how to plan for the gap between cabinet doors.
3/24/2015 • 55 minutes, 11 seconds
WT227 - Hand Tools Make a Better Power Tools User
Do hand tools improve your power tool skills?
3/13/2015 • 21 minutes, 7 seconds
WT226 - Cut Out the Cut List
WT226 - Cut Out the Cut List by Wood Talk | Woodworking
3/10/2015 • 51 minutes, 43 seconds
WT225 - Shop Furniture: Pretty or Plain
How nice should shop furniture be?
3/6/2015 • 17 minutes, 41 seconds
WT224 - Woof Woof Shannon!
Finishing plywood, controlling hand plane tear out, and full extension drawer slides
3/3/2015 • 53 minutes, 10 seconds
WT223 - Take a Class or Buy Tools?
Should you spend your money on a woodworking class, or a new tool?
2/27/2015 • 20 minutes, 55 seconds
WT222 - Freaky Teaky Crud
Attaching a sitting bench top to the base, is the router plane fence necessary, and dealing with mystery goo after finishing.
2/24/2015 • 49 minutes, 58 seconds
WT221 - Measuring and Marking Tools
Measuring and marking tools: which ones we love and how we use them. We also talk about the premium tool market and what is really necessary and what is just bling. (Bling is good sometimes)
2/20/2015 • 37 minutes, 30 seconds
WT220 - Lil' Dado and the Rabbets
Filling pores, do you need to use a lot of different glues, and starter carving chisels.
2/17/2015 • 35 minutes, 10 seconds
WT219 - Storing Lumber
On today's WoodTalk Weekend Edition, we're talking about how we store our lumber.
2/12/2015 • 23 minutes, 52 seconds
WT218 - General Tso's Chisel
Filling pores, using different glues, and and starter carving chisels.
2/10/2015 • 48 minutes, 2 seconds
WT217 - Brandon Gore Interview
An interview with Brandon Gore, judge on Spike TV's Framework.
2/6/2015 • 31 minutes, 31 seconds
WT216 - Giant Little Wood Turds
Double Tenons vs Large Single Tenon, Mortising for curves, when to sharpen your hand saws, and our thoughts on new TV shows Framework and Ellen's Design Challenge.
2/3/2015 • 1 hour, 11 minutes, 50 seconds
WT215 - Finishing Finder
Choosing the right finish for your project.
1/29/2015 • 20 minutes, 2 seconds
WT214 - Look at the Camera!
Grain orientation for planing, matching plywood and solid wood, and keeping glue and finishes warm in freezing temps
1/27/2015 • 58 minutes, 4 seconds
WT213 - Project Creep
On today's show, we're talking about project creep and how projects can get out of control.
Full Show Notes: http://thewoodwhisperer.com/woodtalk/wood-talk-213-project-creep/
1/22/2015 • 15 minutes, 34 seconds
WT212 - Udderly Cold
On today’s show, we’re talking about tips for working with reclaimed lumber, buying workbench lumber, and are dovetail saddle markers lazy woodworking?
For full show notes and links, head here: http://www.thewoodwhisperer.com/woodtalk/wood-talk-212-udderly-cold/?menu=community&apt=woodtalk&mode=posts
1/20/2015 • 39 minutes, 18 seconds
WT211- Ear Juice Finish
On today's show we're talking about paring with Japanese Chisels, Dealing with overwhelming fear of sawdust piles, lumber checking, and wood plugs for stretched ears.
1/13/2015 • 43 minutes, 25 seconds
210 - Giant Hairy Toddler
How do you design furniture and what makes it fine furniture? In this show the guys tackle the tough, woodworking design questions of our age.
1/7/2015 • 1 hour, 18 minutes, 29 seconds
209 - 2014 In Review
A look back at our goals for 2014.
1/7/2015 • 48 minutes, 8 seconds
208 - The OCD Woodworker
Fine-tuning tapered plugs, avoiding slippery surfaces on step stools, and attaching a table top to its base.
1/7/2015 • 59 minutes, 16 seconds
207 - Look Past the Fuzz
Spraying dye, drawers or carcase first, picking wood at the lumber yard.
1/7/2015 • 1 hour, 8 minutes, 54 seconds
206 - We're Thankful!
Lie-Nielsen vs Veritas, loose tenons and bed rails, and refurbish vs new planes.
1/7/2015 • 1 hour, 13 minutes, 11 seconds
205 - Matt's Having Spaghetti
Sealing with shellac, selecting a solvent for an unknown finish, and skipping the jointer and going with a planer.
1/7/2015 • 40 minutes, 26 seconds
204 - Nicole in Reverse
Online etiquette, fixes for cheap plywood, and batch cutting dovetails by hand.
1/7/2015 • 55 minutes, 27 seconds
203 - Mirror Frisbee
Wood warping after a resaw, trouble with a smoothing plane, and octagonal frame joinery.
1/7/2015 • 55 minutes, 31 seconds
202 - Do Less Woodworking!
Solvent for woodworking, box joints and short ceilings, workbenches and T tracks, and selecting wood for your projects.
1/7/2015 • 49 minutes, 41 seconds
201 - Bagged & Boarded
Safe finishes for comic book storage, drawer guide positioning, restoring an antique workbench.
1/7/2015 • 37 minutes, 32 seconds
200 - Celebrating You!
Dry fit strategy, hiding end grain, miters with hand tools, glue on one surface or two, dust collection for routers, wood vs metal planes, glue with long open time, mission style finish, where to start hand saw cuts, oil before shellac, twin tenons, odor-free finish, carbide turning tools.
1/7/2015 • 1 hour, 13 minutes, 24 seconds
199 - Patronizing Matt
Finishes for kitchen cabinets, dealing with glue squeeze-out, and should you get a really small hand plane.
1/7/2015 • 54 minutes, 22 seconds
198 - Neanderthal Parenting Tips
steam bending vs bent lamination, choosing your tools based on sharpening methods, replacing your dust collector's filtration bags
1/7/2015 • 51 minutes, 12 seconds
197 - Shannon's Gushy Thingie
Design rules for grain orientation, filling cracks with finish, making really long panels.
1/7/2015 • 39 minutes, 44 seconds
196 - Pimp My Bench Plane
Rounding over with a random orbit sander, splines or biscuits as a glue-up aide, a bit of marquetry on a box, woodworking in america 2014, Lee Valley Veritas custom planes.
1/7/2015 • 1 hour, 15 minutes, 43 seconds
195 - And We're Back!
Preventing cupped panels, respirators for the permanently bearded, box hinges, Spraying outdoors, acclimating lumber before a project, and avoiding tearout while turning
1/7/2015 • 1 hour, 6 minutes, 47 seconds
194 - Matt Phones It In
Tortured outdoor finishes, string inlay resources, high angle frogs.
1/7/2015 • 48 minutes, 40 seconds
193 - Marc Go Sleepy
Mixing profiles and breadboard ends, using a chisel plane, epifanes outdoor finish, making dadoes and grooves with hand tools.
1/7/2015 • 43 minutes, 3 seconds
192 - The Vanderlist Design
Easy durable finishes, automation distancing us from our craft, and how to perform a ritual bloodletting with your chisels.
1/7/2015 • 1 hour, 5 minutes, 14 seconds
191 - The Chortle Shakes
Ammonia fuming, pre-finishing rituals, plywood in the hand tool shop, how flat is flat enough.