Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about installing a bonding jumper in parallel with the grounded (neutral) conductor and how about multiple services on a single multi-occupancy apartment and shop combo.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about cabinets and enclosures why Article 314 doesn’t apply and why Article 312 will apply.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about bonding raceways used with Enphase PV systems, do you have to apply adjustments to bundled MC cable that is only 20 current carrying conductors, are nipples required to be bonded for service or feeder applications, and when are generators considered a separately derived system.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is what an actual outlet is. We see the term “outlet box” used in the NEC but that is not actually defined. We know that devices are placed in “outlets” and then we call them receptacle outlets or maybe even lighting (luminaries) mounted on outlets that are indeed boxes. So, let's chase that elusive definition of “outlet” in today’s podcast.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is what happens when you have an exam-style range calculation where the ranges fall in column C and column A or B. Are you able to split up the calculation and use Note 3 on those ranges that fall under Note 3 and then use column C for those that do not fall under Note 3. Listen to this episode as I give my opinion on this and it may be controversial for some folks. I seem to always be a great target for these things.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about the changes in 2017 through the 2023 NEC in regards to receptacles in garages, we also chat about adding a receptacle in bathrooms on the lighting circuit, and lastly we talk about EV’s again and the use of NM Cable for the Tesla EV Charger. We also talk about how “above ground pools” was accidentally left out of the 2023 National Electrical Code.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about paralleling smaller EGC’s in a single raceway or cable tray to become a larger EGC simply by paralleling like you can with ungrounded and grounded conductors. This episode examines 250.122(A) and (F).If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about having (3) 6-gang meter enclosures on a single building, when or if you can reduce the neutral to a pedestal in an RV Park, who is the AHJ on a federal project, my rant about AFCI’s on Tik Tok with Steve, and lastly ideas to control exposure to hazardous materials on old job sites. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about supporting MC Cable in a wall after the building is finished, also a great discussion on digital electricity, where I quoted the wrong standards for Class 4 Fault Managed Systems and Associated cables which are UL 1400-1 and 1400-2 and installing MC Cable in a heavy timber application. I also address a question in the end about locknuts and bushings when doing pull box calculations.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about the changes to when you can apply the 70% reduction to the neutral per 220.61(B) in the 2020 versus the 2023 NEC.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the sizing of the branch circuits for storage-type water heaters that are 120 gallons or less. Also, calculate the minimum and maximum overcurrent protection and conductor sizing.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is when you can reduce the size of the neutral in a load calculation and when you are prohibited from reducing the size of the neutral based on the system and various load types.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about what determines how many cables can be in a connector, the NEC or the Manufacturer, also a question about the history of the EGC in raceways, and lastly about supplying a dishwasher and garbage disposer on the same 20 amp branch circuit and is it Ok to do so.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about the requirements for emergency disconnects in the 2023 National Electrical Code. There were a few changes in 230.85 from the 2020 NEC to the 2023 NEC so we will discuss them in this podcast.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to size a metal or nonmetallic wireway per the National Electrical Code. We discuss how to do it when all the conductors are the same size and we also size the wireway when we have predetermined conductors of different sizes being installed.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how the current flows on a conductor and what is different in DC versus AC. Also, a question about motivation and career advancement crept into the episode.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about metal-clad cable and some of the things you need to be aware of about MC Cable. This was asked by a listener who wanted more clarity on the permitted and not permitted uses of MC Cable.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is what changes in the 2023 National Electrical Code is my favorite. Well, there are so many good changes, but my favorite may shock you. You must listen to find out.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about nonmetallic-sheathed cable. We will discuss myths and detailed facts about the use of NM Cable and some of the rules associated with it. This is a must for you RESI folks.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about being your own boss and venturing out on your own in the electrical contracting world. Are you ready for the ups and downs of being an entrepreneur? We will discuss this in this episode.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com. In this episode, Paul will tackle the questions submitted by a listener. The topic coveredin this episode is about whether circuit breakers installed in a panel for surge protection or generator inlets are considered as counting towards maximum overcurrent devices in a panel and we are going to answer the question about restricted access for EVSE ampacity values via apps and control management systems when determining the dwellings service or feeder loads.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about what is a delta high-leg, how it is derived and a little about delta and wye transformers and where one might be a better fit over another.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is project management and customer relationship management software. We received a question about what software we recommend for a contractor to manage their employees and keep projects on task and have the ability to manage all aspects of the business from one simple web-based software. Check out https://ppmbutler.comIf you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode are GFCIs in bathrooms and what happens if a lighted mirror with built-in receptacles is installed. Are they required to be GFCI Protected? Listen as Paul explains his opinion and it differs from the NECA opinion. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode are about the white and gray grounded (neutral) conductor and does it matter which voltage system you use white or gray on. Also, we tackle the issue of paralleling MC Cables and the EGC that is located in each MC Cable.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode are about taking standard colors in a cable assembly, such as Black, Red, and Blue, and changing them to Brown, Orange, and Yellow by simply phase-taping over the existing-colored conductors.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode are a question that was encountered on an electrical exam. The individual failed the exam but remembers a question. However, this also shows how the lack of information presented can lead to multiple additional questions.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode are about the requirements, if any exist, for grounding at a bus shelter. The question was submitted based on power at a bus shelter.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode are about single gang nail-ups and if those are tabs or clamps. While the debate has caused quite a few thousand clicks on Tik Tok and Facebook, the real question is how to address them. In this episode we discuss that topic.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode is about using 1000V with a megometer on 600V rated insulated conductors.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode is about using metal raceways in a PVC raceway installation and are there hazards to be aware of for those metal parts.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode are improper cases to neutral connections on the load side of the service disconnection means and what hazards it can bring on.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode are about backstabbed devices on TikTok and the new Wago-integrated devices hitting the market.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode are about when a neutral conductor is to be considered a current-carrying conductor per the National Electrical Code.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Having a video platform that features a variety of electrical educators can be highly beneficial for the electrical industry and trade for several reasons:Knowledge Sharing: Such a platform can facilitate the sharing of a wide range of knowledge, experiences, techniques, and best practices from around the world. This can help to elevate the entire industry, as professionals can learn from each other's successes and mistakes.Access to Diverse Perspectives: Having a variety of educators ensures access to a diversity of perspectives and approaches. Different educators will have different areas of expertise, different teaching styles, and different ways of solving problems. This diversity can help to enrich the educational experience and cater to a wide range of learning styles.Continuous Learning: The electrical industry, like most other fields, is constantly evolving. A dedicated video platform can provide ongoing, up-to-date education about new technologies, standards, regulations, and best practices. This is essential for professionals who want to stay current in their field.Career Development: Such a platform can be a great resource for those looking to advance in their careers. It can provide training on more advanced topics, help professionals prepare for certifications, and provide insights into potential career paths within the electrical industry.Accessible Education: A video platform can make education more accessible. People can learn at their own pace, on their own schedule, and from the comfort of their own homes. This can be particularly beneficial for those who are already working in the industry and may not have the time or resources to attend traditional classes.Promoting the Trade: An educational platform can also help to promote the electrical trade to a wider audience. It can provide a realistic insight into the industry for those who may be considering a career in it, and can help to dispel misconceptions.Standardization: With a variety of educators teaching on the same platform, there's a higher chance for standardization of practices across the industry. While there's always room for individual approaches, having a common baseline understanding of principles and methods can be incredibly helpful in ensuring safety and efficiency.Community Building: Finally, such a platform can help to foster a sense of community among electrical professionals. It can provide a space for discussion, collaboration, and networking, which can help to strengthen the industry as a whole.Visit FastTraxTube.com for all electrical educational videos from leading electrical code educators. Including Paul Abernathy, Mike Holt and Ryan Jackson.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode are about the use of 310.12(A) through (D) and how you would apply it on an exam and in the real world.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode are Room Air Conditioners and the branch circuits associated with them.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode include the use of brass fittings at the end of ferrous raceways that protect grounding electrode conductors, how much bend is too much bend in a raceway, and finally the old Wago vs Wire Nut question.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered in this episode include the use of GFCI’s on multiwire branch circuits in older homes and how to pick the correct NM Cable for use with an EV Charger in a dwelling unit.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the reality of failing an electrical exam. If you fail by one or two points, did you really only fail by that or did you fail more dramatically by 30 or more points? Do we dwell on the 2 or 3 or target the main reason you failed? Well, we will talk about it in this episode.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered is questions about what disconnection means on services, what’s this stair butler thing, and trying to understand all your websites.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topics covered are when is the nameplate used to size conductors to motors, can you have a 150A Service Disconnect supplying a 200A Panel, are some LED lights permitted in the closet storage space, is the NEC Handbook gospel and lastly is the NM Cable sheathing getting thicker for some reason.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the question that has been submitted via the PaulAbernathy.com online questions portal. You can send all your electrical code-related questions as well so check out the website and SUBMIT.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the question explaining the significant changes in Articles 90, 100, and 110 of the 2023 National Electrical Code.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the question explaining the question about can you take a transformer and reverse wire it and things to think about, installing FMC in a wet or damp location based on an inspector’s inquiry, and lastly, do you need (2) small appliance branch circuits for each kitchen if you have two kitchens in your mansion.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the question explaining the question of drilling new openings in electrical enclosures versus using the knockouts provided, where provided, by manufacturers, the questions about using 125% versus 115% on Motor Overloads, and finally, the PV System sizing for the equipment grounding conductor versus the grounding electrode conductors.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the question of explaining the use of Knob and Tube today in terms of what is acceptable to use and how can it be extended. Also, what happens when you have a new luminaire, and the existing wiring is knob and tube. Well, Paul will give you his take in this episode.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the question of explaining bonding bushings and when you may need them and so many things on bonding in Article 250 that this episode is going to wear you out.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the question of explaining the difference between 310.15(B)(1) for 30°C (86°F) and 310.15(B)(2) for 40°C (104°F) when applying the correction values to the ampacity tables starting at 310.16 through 310.21.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the question of explaining the overview of doing single-family dwelling calculations in the 2020 National Electrical Code. This episode will be Fast and Furious talking about the various elements of doing single-dwelling calculations, including the use of section 310.12, where applicable for electrical exam prep and real-life installations.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the question of explaining the key motor portions of Article 430 for a student struggling with motors and the important features of motor calculations. This is simply a summary and not in complete detail of all of Article 430.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the question of NM Cables being installed in bundles by applying a tie-wrap to a stud and then bundling the NM Cables via those tie-wraps at intervals greater than 24 inches.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the question of the 10-second transfer rules for Emergency Systems, more specifically for EES Type 1 in Health Care per Article 517. Also, Paul rehashes the ferrous vs non-ferrous requirements in 250.64(E)(1) again.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle a request from a listener who asks if 250.97 applies to 120/208V Systems, another ask about GECs in aluminum raceways, and we end on a tradies apps statement.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle a request from a listener who asks about sizing the overloads for motors that are not rated as continuous duty. This episode also covers the question about terminals rated 60°C and conductors with insulation rated 75°C. Paul also ends with a question about his time management skills.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit www.electricalcodeacademy.net for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle a request from a listener who asks about transfer time requirements for standby systems, a panel in a cabinet in a kitchen, and lastly, an inspector who argues wiring integrity testing for an electrical inspection. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit www.electricalcodeacademy.net for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.On this episode, Paul will tackle a request from a listener that wants to know my thoughts about ESS systems and if the rules in Article 706 also apply in section 702.4(B)(2) for automatic transfer systems. If you are looking to learn more about the National Electrical Code, for electrical exam preparation or to better your knowledge of the NEC then visit www.electricalcodeacademy.net for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.On this episode, Paul will tackle a request from a listener that wants to know my thoughts on their prospective career change from being a fedex driver to being an electrician. Paul only speaks the truth about the pitfalls of the move and things to consider along the way.If you are looking to learn more about the National Electrical Code, for electrical exam preparation or to better your knowledge of the NEC then visit www.electricalcodeacademy.net for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.On this episode Paul will tackle a request from a listener that has been struggling to get licensed for over 20 years. There are always obstacles in your way, haters that keep you down, and life just gets in the way. However, listen as Paul explains that doing it for yourself is the most rewarding part of licensure.If you are looking to learn more about the National Electrical Code, for electrical exam preparation or to better your knowledge of the NEC then visit www.electricalcodeacademy.net for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.On this episode Paul will tackle a question about the various elements necessary to performing a commercial calculation. Now, this is just a summary of each step but the process is what you learn in our Fast Trax Program so we might ask well talk about the steps involved.If you are looking to learn more about the National Electrical Code, for electrical exam preparation or to better your knowledge of the NEC then visit www.electricalcodeacademy.net for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.On this episode Paul will tackle a question about the various elements necessary to study in order to pass an electrical exam that is based on the National Electrical Code. Each state will vary in the structure of their test, but they all are based on the NEC. So, Paul explains the elements of preparing for an electrical exam in this episode of Let’s Ask Paul.If you are looking to learn more about the National Electrical Code, for electrical exam preparation or to better your knowledge of the NEC then visit www.electricalcodeacademy.net for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.On this episode Paul will tackle a question about the new structure of 210.12(A) through (E) for Arc-Fault Circuit Interrupters for the 2023 National Electrical Code. While some new things have been added, the real treat is the new structure layout that makes using 210.12 a little easier to understand.If you are looking to learn more about the National Electrical Code, for electrical exam preparation or to better your knowledge of the NEC then visit www.electricalcodeacademy.net for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.On this episode Paul will tackle a question about using dimmers in interior stairways and what the NEC says about this, and we also tackle the question about 517.13(A) and (B) for redundancy for branch circuits that supply fixed electrical equipment in the patient care space of healthcare facilities.If you are looking to learn more about the National Electrical Code, for electrical exam preparation or to better your knowledge of the NEC then visit www.electricalcodeacademy.net for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.On this episode Paul will tackle a question about explaining when you would use 310.15(B)(1) for 30°C versus 310.15(B)(2) and 40°C. Paul also tackles a question about pull boxes and exceeding 360° of bends between pull points.If you are looking to learn more about the National Electrical Code, for electrical exam preparation or to better your knowledge of the NEC then visit www.electricalcodeacademy.net for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. the leading electrical educator in the country, as he answers more questions from the Let’s Ask Paul Portal over at www.PaulAbernathy.com.On this episode Paul will tackle a question about what can be taken into an exam, the issue of an inspector calling out bundling of NM Cables, and lastly the issue of NM Cable in raceways.If you are looking to learn more about the National Electrical Code, for electrical exam preparation or to better your knowledge of the NEC then visit www.electricalcodeacademy.net for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. talks about luminaries that are in clothes closet storage spaces. Paul will examine how to define the clothes closet storage space and then discuss the luminaries that are permitted in the clothes closets. Buckle up as this is a tough one to paint a mental picture of without looking the figures in 410.2 of the 2020 National Electrical Code.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. talks about luminaries that are restricted from being within the 3’ and 8’ space that is described in 410.10(D) of the 2020 National Electrical Code. Paul elaborates on the subject to help paint a mental picture of the all-encompassing space in bathrooms.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical training provider in North America answers a question submitted via the Let's Ask Paul Podcast. On this episode someone asks how to determine the receptacle demand load for an office building with a given square footage and certain number of receptacles.You can join the Fast Trax Electrical Exam Preparation course at www.FastTraxSystem.com and you can also learn about the revolutionary TradiesAPPS™ as well at www.TradiesAPPS.com

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. discusses a question submitted on the Let’s Ask Paul Portal. On this episode Paul explains photovoltaic (PV) supply side connections. Listen to learn the facts from The GURU himself.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. discusses a question submitted on the Let’s Ask Paul Portal. On this episode Paul explains the difference in an AC Coupled and DC Coupled Multi-Mode System of Inverters. Listen to learn the facts from The GURU himself.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. discusses a question submitted on the Let’s Ask Paul Portal. On this episode Paul talks interconnected power production sources and the application of 705.12(B)(1) for feeders. Listen to learn the facts from The GURU himself.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. discusses a question submitted on the Let’s Ask Paul Portal. On this episode Paul talks Photovoltaic and feed-through panels. Listen to learn the facts from The GURU himself.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. discusses a question from the NECA Code Question of the Day Database. ON this episode Paul elaborates on the HVAC conductor sizing questions presented to NECA. Listen to learn the facts from The GURU himself.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. discusses a question from the NECA Code Question of the Day Database. On this episode Paul elaborates on the process of establishing the GES (Grounding Electrode System) at the detached structure when connecting to the rebar. List to learn the facts from The GURU himself.

Welcome to Episode 83 of the Let's Ask Paul Podcast. On this episode Paul tackles a question about the size of the grounding electrode conductor to a concrete encased electrode, sometimes called a Ufer Ground. Paul explains the minimums and maximums of sizing these conductors for this specific electrode.

Welcome to Episode 82 of the Let's Ask Paul Podcast. On this episode Paul tackles a question about different voltage rated conductors in the same raceway. Do they all have to be rated for the highest rated insulation voltage or the voltage to be applied. Listen to find out.

Welcome to the Let's Ask Paul Podcast sponsored by PaulAbernathy.com and Electrical Code Academy, Inc., the premier electrical exam preparation and NEC learning online program provider. In this episode Paul Abernathy, CEO and Founder talks about what to do in the last two weeks of your exam preparation journey and how you should prepare to come into that final stage of electrical exam study mentality. Paul talks about timing for exams and how important it is to have a study plan so as to not waste valuable time in the journeyman electrician and master electrician study plan.For more information on a truly structured electrical exam preparation study guide and how thousands of electricians have come successful using our Fast Trax Electrical Training Programs please visit www.FastTraxSystem.com or www.ElectricalCodeAcademy.com for more information and to see our free tutorial course on our programs.

Listen as Paul Abernathy talks about Article 90, the introduction of the National Electrical Code in this episode of Master The NEC. Paul goes over all the sections in Article 90 and gives an explanation of each of the rules and changes for the 2023 NEC.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers more questions submitted via the Let’s Ask Paul Portal at www.PaulAbernathy.com. In today’s episode questions about 310.15(b)(1) versus 310.15(b)(2) was presented. There were also questions again o n the 2023 National Electrical Code changes to 210.8(D) for Ground-fault Circuit Interrupter protection (GFCI) for specific appliances. Lastly, Paul is asked about rumors of the solid 8 AWG copper ring around a swimming pool for the equipotential bonding being removed for the 2023 NEC, and of course, someone asked Paul about his patents…AGAIN.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers a few questions submitted via the Let’s Ask Paul Portal at www.PaulAbernathy.com. In this episode, Paul answers a question on the 3’ perimeter grid in 680.26(B)(2) and then tackles a question about 60 amp services to apartments.

Listen as Paul Abernathy, the CEO and Founder talks about when is it OK to go above the minimum safety standards of the National Electrical Code. Paul also talks about electrical inspectors and even tells a story about how an electrical inspector died after working one day on the job. If you want or care to know Paul's opinion of going above the NEC then you will enjoy this episode.

Listen as Paul Abernathy, Certified Master Electrical Code Professional and CEO and Founder of Electrical Code Academy, Inc. answer more questions submitted through the Let's Ask Paul Portal at www.PaulAbernathy.com. In this episode Paul gets asked if a GFCI Device, such as a circuit breaker type or receptacle type OK to protect the branch circuit and receptacle when a non-grounding type is replaced with a grounding type.

Listen as Paul Abernathy, Certified Master Electrical Code Professional and CEO and Founder of Electrical Code Academy, Inc. answer more questions submitted through the Let's Ask Paul Portal at www.PaulAbernathy.com. This episode answers the questions about WR Rated Receptacles in damp or wet locations, does Paul accept a former troublemakers apology, and are stud packs, ganged studs, considered a raceway and more.

Join Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., a premier electrical code training academy located in Texas. Today's question was submitted through the Let's Ask Paul Portal at www.PaulAbernathy.com and it pertains to validation of NEC code references for a fire incident being inspected by the electrician or electrical inspector. Remember, you can submit your own questions free and easily at www.PaulAbernathy.com

Join Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. as he answers another question from those submitted via PaulAbernathy.com and the Let's Ask Paul Portal. In this episode, Paul answers the question about (2) 100 Amps breakers in a 125A Panel as well as explains straight versus slash-rated circuit breakers.

Listen as Paul Abernathy and Jay Grundberg chat about the recent recall for the Schneider QO with the plug-on neutral load center recall. With over 1.4 million load centers part of this recall, it is bound to be a costly error for Schneider, also known as Square D.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question submitted via the Let's Ask Paul Portal at www/PaulAbernathy.com. Today's question was about using an equipment bonding jumper from the metal box to the device instead of taking an equipment bonding jumper from the equipment grounding conductor wirenut where all the EGC's are connected.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers more electrical code-related questions from folks who submit questions on the Let's Ask Paul Portal a www.PaulAberanthy.com. Today's podcasts answer a question asking for advice on becoming an electrical inspector.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers more electrical code-related questions from folks who submit questions on the Let's Ask Paul Portal a www.PaulAberanthy.com. Today's podcasts answer a question about the ampacity of Nonmetallic-sheathed cable and another about installing remote distribution panels, sometimes called sub-panels, in detached garages or other detached structures.

Listen as Paul Abernathy, Founder and CEO of Electrical Code Academy, Inc. and creator of the Fast Trax® National Electrical Code Learning System answers more questions submitted via PaulAbernathy.com at the Let's Ask Paul Portal. On this episode Paul answers questions on exam prep in the last 2 weeks, questions on stripes on neutrals, and using NM-B in a specific construction environment. Be sure you subscribe and follow and if you have any electrical exam preparation or code related questions, please visit www.paulabernathy.com to submit your questions.If you are needing a structured electrical exam preparation program to learn the National Electrical Code, then visit www.FastTraxSystem.com and watch our program demo video.

Listen as Paul Abernathy, CEO, and President of Electrical Code Academy, Inc. answers another question submitted via the portal at www.PaulAbernathy.com. This episode answers a submission about conductor sizing for motor compressors for air conditioning systems using the 2020 National Electrical Code.

Listen as Paul Abernathy, CEO, and President of Electrical Code Academy, Inc. answers another question submitted via the portal at www.PaulAbernathy.com. This episode addresses the overcurrent protection rules for transformers found in 450.3(B) of the 2020 National Electrical Code.

Join Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. and the creator of the Fast Trax® NEC Learning System. On this episode of Let's Ask Paul, the discussion is about understanding the phrase 150 volts or less to ground and when it says 150 volts or more to ground in the National Electrical Code.If you are interested in the Fast Trax® NEC Learning System to increase your knowledge of the National Electrical Code, then visit www.ElectricalCodeAcademy.net for more information and to join our Fast Trax® Family.

Join Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. and the creator of the Fast Trax® NEC Learning System. On this episode of Let's Ask Paul, the discussion is about kitchen receptacle spacing, range calculations on an electrical exam and so much more.If you are interested in the Fast Trax® NEC Learning System to increase your knowledge of the National Electrical Code then visit www.ElectricalCodeAcademy.net for more information and to join our Fast Trax® Family.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answer questions submitted on PaulAbernathy.com at the Let's Ask Paul. On this episode we answer questions about conductors to remote panels and chats on slash versus straight ratings. Also, you can submit your questions to www.PaulAbernathy.com

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question submitted via the Let's Ask Paul Portal at www.PaulAbernathy.com. This episode is dedicated to Paul and his heartfelt message to his past, current, and future students. The funding of Electrical Code Academy, Inc. was not about the money. It was about the ability to teach others on a platform that can truly make a difference in so many prospective students’ life.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question submitted via the Let's Ask Paul Portal at www.PaulAbernathy.com. This episode is dedicated to a question being asked about why an EGC is needed at receptacles and why you just don't drive ground rods at receptacles rather than installing an equipment grounding conductor. This episode address the issue of the Ground Rods Only.For more information on the World's Best Grounding and Bonding Course known as the Fast Trax® Purple, visit www.ElectricalCodeAcademy.net and select Fast Trax® Purple for more information.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy answers more submitted questions from the Let's Ask Paul Portal at www.PaulAbernathy.com. In this episode Paul answers questions on box supports, most notably those without holes for additional support, and of course the 3' EMT support debate again. Paul also answers a few other questions in this episode as well so tune in to see what gets asked...you never know if the question is yours.Here is the article I referenced in the podcast that sets the facts straight on the EMT support debate.https://www.ecmweb.com/national-electrical-code/article/21160492/practically-speaking-stuck-in-the-middle

Join Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., a premier provider of electrical exam preparation training and post licensing electrical code education as he answers a question about the use of WAGO's and backstabbing receptacle devices. For more information on Electrical Code Academy, Inc. visit www.ElectricalCodeAcademy.net to see our programs and try our demos.

Join Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., a leading electrical educational provide for learning the National Electrical Code as he answers more questions from PaulAbernathy.com. On this episode Paul answers (3) questions, one about a single receptacle outlet as a junction for multiple branch circuits, another about using all the terminals on a duplex receptacle or must you pigtail, and lastly Paul is asked about the use of a listed wall mounted control device for controlling a lighting outlet rather than a typical wall toggle (snap) switch. This is a short my informative Ask Paul segment.

Join Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. as  he shows an inside look into the 2020 NEC Grounding and Bonding Program.--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Watch as Paul Abernathy, CEO, and Founder of Electrical Code Academy,  Inc. explains the rules for bonding branch or feeder circuits that are  from systems that are over 250 volts to ground. These systems require a  little extra bonding attention when working with these systems.--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Join Paul Abernathy, Master Electrician and Founder and CEO of  Electrical Code Academy, Inc. as he explains something seldom seen on an electrical exam, the dreaded ambient correction factor. If you would like to see this video visit https://youtu.be/ey8EnuZ7yGEAlso, if you are interested in electrical exam preparation courses and you only want the BEST then visit www.FastTraxSystem.com for more details.--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

[REPLAY] - Join Paul Abernathy as he talks about Kenny Clamps, and GECs  in Ferrous Raceways and Enclosures, Gas Pip Bonding and so much more in  this episode of Coffee Hour. FYI - Ukraine CRUSH Russia...Beat Them Into  The Earth!!!!To watch this VIDEO go to www.Youtube.com/masterthenec and search for Kenny Clamps--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

To discover more about master electrician and journeyman electrician  electrical exam preparation training, PLEASE check out: ➡  https://www.electricalcodeacademy.net/fasttraxprogram Get our Fast Trax Exam Prep Course today and Pass That Exam at  www.FastTraxSystem.comThe video is all about electrical exam preparation training   but also  try to cover the following subject: -electrical exam preparation  -understanding the national electrical code  -national electrical code  Youtube is the best website to visit when searching for videos about  electrical exam preparation training. Electrical exam preparation training is obviously something that  intrigues you and other individuals so I made this video . ~~~~~~~~~~~~~~~~~~~~~ If you would like to learn even more about electrical exam preparation I  recommend you to have a look at our other videos :  https://www.youtube.com/masterthenec _________________________ Now that you have actually viewed my YT video regarding electrical exam  preparation training has it helped? Please share with your friends the video to help other individuals  looking for electrical exam preparation or understanding the national electrical code :)--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

To discover more about master electrician and journeyman electrician  electrical exam preparation training, PLEASE check out: ➡  https://www.electricalcodeacademy.net/fasttraxprogram  Get our Fast Trax Exam Prep Course today and Pass That Exam at  www.MasterTheNEC.com  The video is all about electrical exam preparation training   but also  try to cover the following subject: -electrical exam preparation  -understanding the national electrical code  -national electrical code  Youtube is the best website to visit when searching for videos about  electrical exam preparation training. Electrical exam preparation training is obviously something that  intrigues you and other individuals so I made this video . ~~~~~~~~~~~~~~~~~~~~~ If you would like to learn even more about electrical exam preparation I  recommend you to have a look at our other videos :  https://www.youtube.com/masterthenec _________________________ Now that you have actually viewed my YT video regarding electrical exam preparation training has it helped? Please share with your friends the video to help other individuals  looking for electrical exam preparation or understanding the national  electriclal code :)--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question submitted via PaulAbernathy.com. The Let's Ask Paul portal dedicated to answering electrical code related questions for electricians and electrical contractors. Now, in this episode Paul will address a question about dedicated equipment space and the running of raceways on the surface as well as being direct buried.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. as he talks all things electrical based on submitted questions via the PaulAbernathy.com portal. Today's question is about learning the NEC when not an electrician as well as how do I hire and identify a qualified electrician.

Listen as Paul Abernathy, CEO and Founder of the nation’s leading electrical exam preparation and National Electrical Code learning system called the Fast Trax® answers more questions submitted from the www.PaulAbernathy.com portal Ask Paul. In this episode, Paul answers a question about getting to an exterior electrical panel with NM-B and MC and his opinions and options as well as a question about neutral loads and how to address the changes in table 220.12 and the note under the table when it comes to neutral loads.

Find out more about "journeyman electrician exam" and "master electrician exam" you need to check out: ? https://www.electricalcodeacademy.netOur video is about journeyman electrician exam topic valuable information but we try to cover the following subjects:-electrician exam -journeyman electrician -electrician journeyman-master electrician exam-electrician masterSo you would like to know more about journeyman electrician exam, I did too and here is the result.Journeyman electrician exam intrigued me so I did some research and published this to YT .Take a deep breath and watch the following video regarding journeyman electrician exam You can subscribe to channels you like to see more content from those channels. You can discover a Subscribe button under any YouTube video or on a channel's page. Once you register for a channel, any new videos it releases will appear in your Subscriptions feed. FOR YOUR INFORMATION Just wanted to let you know that Liking a YouTube video is a easy method to let us understand that you enjoy our work. If you are logged in, liking a video will include it to your "Liked videos" playlist. so you can find it later onIf you're not the biggest fan of a video, disliking it is one way to show your viewpoint and let us know we have to improve. REMAIN TUNED: YouTube ? https://www.youtube.com/masterthenecFacebook ? https://www.facebook.com/masterthenecTwitter ? https://twitter.com/MasterTheNECThere you'll be able to access lots of info, about other popular subjects as: electrician exam,journeyman electrician, electrician journeyman,electrician certification.Goodbye and thank you for enjoying!--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Join Paul Abernathy on an episode where they talk Kitchens. In this episode the hosts will cover common topics on electrical wiring to kitchens and the National Electrical Codes that are associated with this Kitchens. Be sure to visit www.ElectricianLIVE.com for a list of all our videos and podcasts for Electricians. We have shows on Electrical Exam Preparation as well as for post licensing topics such as grounding and bonding. We even have access to the Ask Paul Podcast as well.--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy and Jay Grundberg talk about when someone quotes the electrical code or makes a reference to it do you really listen to them and trust their knowledge of the National Electrical Code or do you verify yourself.--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Watch as Paul Abernathy walks you along a journey of finding answers to common code questions in the National Electrical Code and how the Fast Trax Program works. Paul uses is Fast Trax Program questions to help lookup and think about electrical exam prep.--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Join Paul Abernathy for a great episode on Single Family Dwelling Calculations. To listen to all our episodes and watch our videos check out www.ElectricianLIVE.com for links to all our platforms.--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy, CEO and Founded of Electrical Code Academy, Inc. answers questions submitted from PaulAbernathy.com. This episode answers the submitted question of when you actually count the neutral conductor as a current-carrying conductor.

Listen as Paul Abernathy answers questions submitted to PaulAbernathy.com. In this episode, Paul answers questions on GECs and when they are installed in metal raceways, and how it affects the installation with PVC boxes.

Listen as Paul Abernathy answers questions submitted to PaulAbernathy.com. In this episode, Paul answers questions on GFCIs and within 6' of sinks, and tips on growing your electrical business as requested by a listener.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers a question about adjustments and corrections for a conductor based on the 2020 National Electrical Code. Be sure to have your NEC handy on this one or just enjoy the show and buckle up.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the premier electrical exam preparation and National Electrical Code learning provide in the electrical code industry. Today's podcast answers questions submitted by listeners at www.PaulAbernathy.com and they target assumptions on an electrical exam for service calculations, we also answer that AFCI question for service changes or upgrades in this episode. Sit back and enjoy the show.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers a question about the steps to a standard method calculation for a single-family dwelling using the 2020 National Electrical Code. This is a great podcast for those preparing for an electrical exam for the journeyman electrician and master electrician exam.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers a question about wall space versus a raised floor with a front and daisy-chaining luminaries in a suspended ceiling. All submitted by folks like you at the Let's Ask Paul Portal at www.PaulAbernathy.com

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. and MasterTheNEC responds to a submitted question about basements in flood zones and what his thoughts are and what FEMA says. This question was submitted via the Let's Ask Paul portal at www.PaulAbernathy.com

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question that was submitted via PaulAbernathy.com and the Ask Paul Portal. This submission asks about the differences in 312.2 and 314.15 when dealing with wet and/or damp locations.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. and creator of the CMECP® Certification Program explains the 10' tap rule for someone who submitted a question via the Ask Paul Forum at www.PaulAbernathy.com. If you have questions feel free to submit them for a response via email or if selected, via a Podcast.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers a question about supplemental grounding electrodes and which electrodes are required to be supplemented in the 2020 National Electrical Code.

Listen to the January 6th, 2022 Episode of Electrify Podcast where the hosts talk about bidding jobs.

Join Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. as he explains the 83% minimum conductor sizing rules when using 310.12 of the 2020 National Electrical Code.

Listen as Paul Abernathy, a nationally renowned expert on the National Electrical Code answers more questions submitted via the Ask Paul Portal at www.PaulAbernathy.com. Today's episode answers three questions. Explaining the expectation in 210.12(D), what is double lugging and is it ok, and finally a submitter would like advice for their friend who is becoming an electrical inspector.

Listen as Paul Abernathy answers a question submitted via the PaulAbernathy.com portal. Today's question is centered around AFCI Protection in the receptacle form and bedrooms. Also, the submitter asks when is the best time to start the Fast Trax® Program.

Listen as Paul Abernathy receives and answers another question submitted via PaulAbernathy.com. Today's podcast is explaining the exceptions found in 230.40 which pertain to the ability to have multiple service entrance conductor sets. Listen as Paul attempts to paint a mental picture to help the submitter understand the intent of 230.40 Exception 1 through 5.

Listen as Paul Abernathy answers a question about the installation of NM-B in an unfinished basement. This question was submitted via www.PaulAbernathy.com using the online portal where you can also ask your most pressing electrical questions.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. tackles another question submitted via PaulAbernathy.com, the Let's Ask Paul Portal. Today's podcast and question is about what Paul used to bore under sidewalks and driveways as an electrical contractor.

Join Paul Abernathy as he tackles another question submitted via PaulAbernathy.com. Today's question is about acceptable levels of objectionable current on the supply-side of the service disconnection means and what should or should not be done about it.

Listen as your hosts Paul Abernathy and Jay Grundberg discuss the value of home inspectors to electricians as well as homeowners. This is the audio portion of the ELECTRIFY™ LIVE show that takes place every Thursday Night. Visit www.ElectrcianLIVE.com for viewing options.

Join Paul Abernathy as he answers a question submitted on what happens when you install a manual transfer switch between the meter and the service disconnection means as well as a discussion on the changes and clarity to supply-side connections made in 705.11 for the 2020 NEC.

Listen as Paul Abernathy and jay Grundberg chat about an unfortunate incident that happened recently to Jay "The Basement King" Grundberg and it can happen to you also. All electrical contractors should listen and learn.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy and jay Grundberg chat about an unfortunate incident that happened recently to Jay "The Basement King" Grundberg and it can happen to you also. All electrical contractors should listen and learn.

Introducing the new ELECTRIFY™ Platform with your Hosts Paul Abernathy and Jay "The Basement King" Grundberg. The revamped video and podcast series for Electricians Only.

Join Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. as he answers a question submitted to Let's Ask Paul through the portal at www.PaulAbernathy.com. In this episode, Paul answers the question on metal nail plates or sleeves to protect the metal-clad cable in metal framing members. You may be shocked at what the NEC says and the history behind it.

Listen as Paul Abernathy answers another question from PaulAbernathy.com. This episode Paul answers a question about receptacle ratings and circuit breakers.

Join Paul Abernathy, CEO and Founder as he answers an electrical question submitted via PaulAbernathy.com, the online electrical portal for getting all your electrical questions answers.

Listen as Paul Abernathy explains pull box calculations for someone who submitted a question via the paulabernathy.com portal.

Listen as Paul Abernathy, a nationally recognized expert on the National Electrical Code answers questions that have been submitted via Ask Paul, the portal for anyone to ask electrical-related questions located at www.PaulAbernathy.com. This episode addresses the question of whole-house AFCI or GFCI products and if they are available as well as a question about receptacles in the garage.

Listen as Paul Abernathy, a nationally recognized expert on the National Electrical Code answers questions that have been submitted via Ask Paul, the portal for anyone to ask electrical-related questions located at www.PaulAbernathy.com. This episode address the question can EMT support TC Cable and also the GFCI issues on HVAC Mini-Splits. Listen as Paul explains them in only a way he can.

Listen as Paul Abernathy, a nationally recognized expert on the national electrical code answers a question submitted regarding the 310.12 for the 83% rule for service and feeder conductor sizing and how it may have changed in the 2020 National Electrical Code.

Listen as Paul Abernathy, a nationally recognized expert on the national electrical code answers a question submitted regarding Article 392 and the installation of single insulated conductors in a cable tray and how it may have changed in the 2020 National Electrical Code.

Listen as Paul Abernathy, a nationally recognized expert on the national electrical code answers a question submitted regarding the 230.71(B) and the two to six disconnection means and how it may have changed in the 2020 National Electrical Code.

Listen as Paul Abernathy answers a submitted question on the use of Type NM-B Cable and Type MC Cable in wet locations.

Listen as Paul Abernathy answers a question on which sections of the 2020 National Electrical Code do you use to size overhead service conductors, underground service conductors, and service entrance conductors in Article 230 of the NEC.

Listen as Paul Abernathy, a nationally recognized expert on the National Electrical Code as he explains Electric Vehicles and Article 625 of the NEC.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy, a nationally recognized expert on the National Electrical Code as he explains Electric Vehicles and Article 625 of the NEC.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy, a nationally recognized expert on the National Electrical Code as he explains Electric Vehicles and Article 625 of the NEC.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy, a nationally recognized expert on the National Electrical Code as he explains Electric Vehicles and Article 625 of the NEC.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy explains the use of Table 110.26(A)(1) in the 2020 National Electrical Code as well as the various conditions that can affect the working space minimum requirements. Paul is an electrical code and exam preparation expert and can be found at www.ElectricalCodeAcademy.net if interested in electrical exam preparation or study plans for getting your electrician's license in your state.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul explains GFCI protection for appliances in the 2020 National Electrical Code and more specifically section 422.5(A) and (B), along with a short overview of 210.8.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy explains receptacle ratings of 210.21(B)(3) in 5 minutes or less.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen to another episode of Code and Five as Paul Abernathy attempts, and fails on most attempts, to explain the NEC in 5 minutes or less. Such as this episode which is just shy of 6 minutes, we will still call it Code In Five...PLUS. This episode is about receptacles in foyers and what exactly is a foyer anyway.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy talks about Section 300.14 and Free Conductors length necessary in junction boxes, outlet boxes, switch points within boxes, and so on.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

In today's Code in Five Paul talks about the use of bonding jumpers and are they required for transformers and other applications on the load side of a service disconnection means. Now, we are not talking about equipment bonding jumpers, we are talking about the bonding of the wiring method to the metal cabinet or enclosure or in our case today a transformer.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy talks about the Ceiling Suspended (Paddle) Fan Box requirements in 314.27(C) and the change associated with it for the 2020 National Electrical Code.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy talks about the use of Type TC- Power and Control Cable for service entrance applications and what you need to know about the uses permitted and uses not permitted for the wiring method called Type TC - Power and Control Cable.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy does his best in explaining terminal provisions for over 100A or less or conductors 1/0 AWG and larger per 110.14(C)(1)(b). Be sure to go listen to Episode 10 for the explanation of temperature limitations in 110.14(C) for the full context of the lesson.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy FAILS yet again to explain the NEC in 5 minutes or less. In fact, maybe we should call it Code in 5, 6, 7, or 8 minutes. Anyway, Paul does his best in explaining terminal provisions for 100A or less and conductors sized 14 AWG through 1 AWG per 110.14(C)(1)(a). Cut the man some slack as it's a lot of info baby.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy explains Conductive Pool Shells and the requirements for Perimeter Bonding in this fast-paced episode. When exactly is a pool considered a conductive pool shell in the 2020 NEC per 680.26(B).--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy talks about the Re-identification of an insulated conductor other than green, white, or gray as a grounded conductor. This short 5-minute episode will help you understand how you can reidentify a conductor in a cable assembly.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul explains Table 250.66 and 250.66(A),(B), and (C) when deciding which you go with depending on the type of electrode you are working with.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy talks about the new 230.67 requirements for services supplying dwelling units in the 2020 National Electrical Code.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Join Paul Abernathy as he examines 300.14 Free Conductor in this 5-minute code lesson.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen to our latest series called Code in Five with Paul Abernathy. This week's 5 minutes is on 210.11(C)(1) through (C)(4). The required branch circuits.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Join Paul and Jay on this episode of Electrician LIVE where they talk about their top common inspection fails seen in the field. This should be a great show on electrical trade topics with an emphasis on the National Electrical Code.

Listen as Paul Abernathy, Founder, and CEO of Electrical Code Academy, Inc. talks about a recent article in EC & M Magazine and attempts to add additional context to the article and his opinion of the national electrical code rules around the article. Paul encourages you all to subscribe to the EC & M publications found at www.ecmweb.com for great electrical industry content.

Listen as Paul Abernathy explains the use of Table 110.26(A)(1) in the 2020 National Electrical Code as well as the various conditions that can affect the working space minimum requirements. Paul is an electrical code and exam preparation expert and can be found at www.ElectricalCodeAcademy.net if interested in electrical exam preparation or study plans for getting your electrician's license in your state.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers questions submitted via www.PaulAbernathy.com and the Ask Paul Portal. In today's episode, Paul answers the questions about where it says you "can't Tap a Tap" as well as how to use multiplication and division to solve your conductor sizing questions when derating is involved.

Listen as Paul Abernathy, Founder, and CEO of Electrical Code Academy, Inc. answers questions on detached structures disconnection means as well as a pull box sizing question from a submission on www.PaulAbernathy.com. If you are an electrician and you have electrical code-related questions on the National Electrical Code then join us and ask your question.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy. Inc. announces a SPECIAL JUNE 2021 ONLY sale where you get EVERYTHING for the 2017 and 2020 NEC that Electrical Code Academy, Inc. has to offer and you get it for 2 years from the date of bundle activation. Once JUNE is over the special will be OVER so do not ask if you miss out.

Listen as Paul Abernathy explains the rules for receptacle outlets and outlets in general in meetings rooms as described in 210.65 of the 2020 National Electrical Code.

Greetings as Paul Abernathy, CEO and President of Electrical Code Academy, Inc. talks about the principles of Series and Parallel Circuits when studying for an electrical exam. Electrical exam preparation should always include basic electrical theory as many electrical exams incorporate some level of basic knowledge in their examination. Join Paul as he breaks it all down.

Listen as Paul Abernathy talks about the 3 stages of impressions that you give a customer on a job site or with a potential customer. This applies to service technicians and electricians on job sites as they represent their company in the best possible image.

Listen as Paul Abernathy talks, and yes gets redundant, on pull box calculations and how they can differ in real life versus electrical exams. Paul will discuss how the sizing of pull boxes works and things to take into consideration.

Listen as Paul explains GFCI protection for appliances in the 2020 National Electrical Code and more specifically section 422.5(A) and (B), along with a short overview of 210.8.

Join Paul Abernathy as he explains the lighting outlet requirements in 210.70(A) for Dwelling Units. There is always some confusion on what outlets are, both lighting outlets and receptacle outlets so Paul will clear that up as well as discuss the lighting outlet requirements.

We are excited to announce this May 22, 2021, Webinar on the 2020 National Electrical Code. This webinar will focus on Section(s) 240.21(B) Feeder Taps and 240.21(C) Transformer Secondary Conductors and the various code rules associated with those specific sections. This webinar is $25.00 (Basically, $12.50 an hour) for more than your money's worth of education. The seating for this webinar is limited so sign up today to ensure your spot is available.To Register (and Pay) for this webinar visit: https://www.electricalcodeacademy.net/webinarliveYour links to attend will be emailed to the e-mail address used during your purchase within 24 hours of the webinar. Please check your SPAM FOLDER if you have not received your access information in the 24 hours prior to the webinar. This event WILL NOT be recorded so you MUST attend LIVE, we do not offer refunds for this event.

Listen as Paul Abernathy explains receptacles ratings in 5 minutes or less.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. talks about their new Affiliate Program on all their electrical training products, with the exclusion of their partnered CEU Courses. ECA, Inc. offers Residential, Commercial, Industrial, Grounding and Bonding, and even Electricity 101 programs for not only electrical students but also those who are already licensed and need to brush up on their skills. In fact, the majority of their programs are sold to electrical contractors with multiple employees so that the owner can track the electrician's learning process and establish baselines for raises, bonuses, promotions, and so on. If you are interested in joining our FREE affiliate program then visit https://electricalcodeacademy.goaffpro.com and sign up today and start earning your commissions.

In today's Code in Five Paul talks about the use of bonding jumpers and are they required for transformers and other applications on the load side of a service disconnection means. Now, we are not talking about equipment bonding jumpers, we are talking about the bonding of the wiring method to the metal cabinet or enclosure or in our case today a transformer.

Listen as Paul Abernathy talks about the box requirements for suspected (paddle) ceiling fan boxes and how the rules have changed from the 2017 National Electrical Code to the 2020 National Electrical Code.

Listen as Paul Abernathy talks about some of the top 10 grounding mistakes made not only by electricians but non-electricians as well, such as handymen ( or I guess handywomen as well) and others like the do it yourself crowd. Paul breaks down the rules based on a well-done article in the EC & M Magazine from 2014. Join us for a relaxing chat on grounding and bonding.

Listen as Paul Abernathy talks about the use of Type TC- Power and Control Cable for service entrance applications and what you need to know about the uses permitted and uses not permitted for the wiring method called Type TC - Power and Control Cable.

Listen as Paul Abernathy does his best in explaining terminal provisions for over 100A or less or conductors 1/0 AWG and larger per 110.14(C)(1)(b). Be sure to go listen to Episode 10 for the explanation of temperature limitations in 110.14(C) for the full context of the lesson.

Listen as Paul Abernathy FAILS yet again to explain the NEC in 5 minutes or less. In fact, maybe we should call it Code in 5, 6, 7, or 8 minutes. Anyway, Paul does his best in explaining terminal provisions for 100A or less and conductors sized 14 AWG through 1 AWG per 110.14(C)(1)(a). Cut the man some slack as it's a lot of info baby.

Listen as Paul Abernathy explains Conductive Pool Shells and the requirements for Perimeter Bonding in this fast-paced episode. When exactly is a pool considered a conductive pool shell in the 2020 NEC per 680.26(B).

Listen as Paul Abernathy talks about the Re-identification of an insulated conductor other than green, white, or gray as a grounded conductor. This short 5-minute episode will help you understand how you can reidentify a conductor in a cable assembly.

Listen as Paul Abernathy explains 2020 NEC section 210.21(B)(1) through (B)(4) in 5 minutes, well I lied, more like 6 minutes on this one as it was a tough one to capture in 5 minutes or less but he tried. This is about receptacle ratings and branch circuit ratings.

Listen as Paul Abernathy is asked via email about his thoughts on women in the trade. I think it is clear that being an electrician is gender-neutral as it is all about the space between your ears than what dangles between your legs.

Listen as Paul Abernathy explains the change to 230.71(B) for the 2020 National Electrical Code with regards to the two to six service disconnection means rule.

Listen as Paul Abernathy talks about his new partnership with CBD Pure, the manufacturers of some of the highest and purest CBD (Cannabidiol) on the market. The products are available in Drops, Creams, Sprays for both humans and pets. Here are the links to the various products:CBD Cream - https://www.cbdpurecream.com?AFFID=486272CBD Oils - https://www.cbdpure.com?AFFID=486272CBD Oral Spray - https://www.swiftcbd.com?AFFID=486272CBD for Pets - https://www.getcbdpet.com?AFFID=486272

Listen as Paul explains Table 250.66 and 250.66(A),(B), and (C) when deciding which you go with depending on the type of electrode you are working with.

Listen as Paul Abernathy talks about the new 230.67 requirements for services supplying dwelling units in the 2020 National Electrical Code.

Listen as Paul Abernathy talks about the allowance of using the Grounded Conductor to bond metal noncurrent carrying metal parts in accordance with 250.142.

Join Paul Abernathy as he examines 300.14 Free Conductor in this 5-minute code lesson.

Listen to our latest series called Code in Five with Paul Abernathy. This week's 5 minutes is on 210.11(C)(1) through (C)(4). The required branch circuits.

Listen as CEO and Founder Paul Abernathy of Electrical Code Academy, Inc. a leader in providing electrical exam preparation training for electricians explain the concept of ballistic training and how a competency review is not designed to give you answers only on the reading material but also force you to use the NEC at the same time.

Listen as Paul Abernathy, CEO and President of Electrical Code Academy, Inc. talks about sizing the supply-side bonding jumper for 2020 national electrical code section 250.102(C)(1) and (C)(2).

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. talks about the requirements of section 404.8 in terms of accessibility and grouping of switches and circuit breakers used as switches in the 2020 national electrical code.

Listen as Paul Abernathy explains Section 300.5 for underground installations. Every electrician should be aware of the requirements for underground installations and the depth of cover requirements. However, are you aware of all the other underground requirements for electrical installations? Well, this informative podcast will explain it all.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. chats about why learning the NEC is important for field electricians and what role it plays as an electrician and as a potential owner of your own electrical contracting business.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. is excited about the ability to offer their new 2017 NEC Bundle along with their very popular 2020 NEC Bundle and since times are tight they are also adding a new Extended Membership option for the Fast Trax Students who are near the end of their 12-month program.

If you're interested to find out more about NEC Grounding and Bonding, PLEASE visit: https://www.electricalinstructor.com and sign up for this 2-hour webinar.This webinar is about identifying and sizing supply-side bonding jumpers and load side equipment bonding jumpers. 2-hours of a detailed examination of 250.102(C) and (D).This video is about NEC Grounding and Bonding information but also try to cover the following subject:-grounding and bonding -bonding and grounding -grounding and bondingSo you wish to know more about NEC Grounding and Bonding, I did too and here is the result.NEC Grounding and Bonding interested me so I did some research and uploaded this to YouTube ._________________________This channel has other related video clips about grounding and bonding, bonding and grounding and grounding and bonding Please check them out : https://www.youtube.com/masterthenec~~~~~~~~~~~~~~~~~~~~~Have I answered all of your questions about NEC Grounding and Bonding? Individuals who searched for grounding and bonding likewise searched for bonding and grounding.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., A Texas-based corporation talks about the important changes that are going to take place to the monthly subscription membership plans on the Youtube.com/masterthenec platform.Starting February 1, 2021, the "2020 NEC Series" $4.99 per month level of support will be discontinued. Why, because the 2020 NEC Analysis series will be rolled into the newly named "General Membership" level, previously called "Electrician Exam Prep LIVE". This new "General" membership will give access to EVERYTHING we have to offer on that platform, such as exclusive videos, podcasts, lectures, webinars, weekly ZOOM electrical training and so on much more.We will also be renaming the "Extreme Member Package" to "VIP Membership". This VIP level is a level that subscribers who wish to show us additional "LOVE" for the content we provide but also have a deep desire for additional discounts on our ElectricianPRIDE.com products, including the newest "Customize" option for merchandise, such as adding company names or individual names, to the products at ElectricianPRIDE.com.Note: This monthly subscription has nothing to do with the courses offered by Electrical Code Acadaemy, Inc., such as the Fast Trax or our trade-related courses for Residential, Commercial, Industrial Wire, and so on.

Listen as Paul Abernathy, CMECP® and Founder of Electrical Code Academy, Inc. talks about the importance of the CMECP® Program and what it costs, and how to get involved in the program. The program is designed to take normal knowledge of the National Electrical Code and kick that knowledge to the next level by validating your knowledge within an extensive checks and balances process over 6 months.

Listen as Paul Abernathy talks about the National Electrical Code requirements for color schemes on ungrounded, grounded, and equipment grounding conductors and the true facts behind it that electricians should know.

Listen as Paul Abernathy talks directly to those who are nervous or anxious about taking their electrical exam. The key factors that cause that anxiety are controlled by your own emotions and Paul will discuss how to resolve those in this episode.

For those electrical instructors and students who aspire to be an electrical instructor someday this podcast episode is for you. In the episode we talk about my personal teaching style, how I used presentations, how I handle disruptive students, the good and the bad way, and my recommendations for always closing live training sessions so smooth over the audience.

Listen as CEO and Founder of Electrical Code Academy, Inc. talks about how to size for box fill when you have more than (4) equipment grounding conductors in the box. For all of those learning the NEC this is a change in the 2020 NEC.

CEO and Founder of Electrical Code Academy, Inc. is pleased to announce phase 1 of the companies electrical training platform that includes weekly electrical exam preparation training for existing Fast Trax NEC Learning System students as well as those supporters at Youtube.com/masterthenecFor those looking to support Electrical Code Academy, Inc. over on Youtube as a Paid Subscriber here is the link for more details. - https://www.youtube.com/channel/UC3Yf5IlcHI60_3iYqx0G8fQ/join

Join nationally recognized electrical code expert Paul Abernathy as he talks about the NFPA 70E for Electrical Safety in the Workplace. Be sure to subscribe to get each new episode of this safety series. All electricians, including helpers and apprentices, should listen to this series.

Join nationally recognized electrical code expert Paul Abernathy as he talks about the NFPA 70E for Electrical Safety in the Workplace. Be sure to subscribe to get each new episode of this safety series. All electricians, including helpers and apprentices, should listen to this series.

Join nationally recognized electrical code expert Paul Abernathy as he talks about the NFPA 70E for Electrical Safety in the Workplace. Be sure to subscribe to get each new episode of this safety series. All electricians, including helpers and apprentices, should listen to this series.

If you are looking for the "Holy Grail" of learning courses on the 2020 National Electrical Code as well as individualized education on Residential, Commercial, Industrial, Grounding and Bonding as well as the basics of electrical theory in one package that won't break the bank. We are excited about our 2020 NEC Bundle Package for the year 2021. It offers everything for electricians and electrical contractors to learn electrical practices in all the realms of electrical wiring. Check it out at www.electricalcodeacademy.com today and click on the 2020 Bundle links.

Listen as Paul Abernathy explains how you get things changed in the National Electrical Code by using a backend approach to public input submittals as well as Paul thanks all of the electrical students who have joined the Electrical Code Academy, Inc. family in 2020. Listen to the entire episode and give it a LIKE if you appreciate what we do via Apple Podcast.

So you want to take on some work as an Expert Witness in the electrical trade? Well, you need to listen to this episode of Master The NEC to see what Paul Abernathy has to say about being an expert witness and the things you need to consider before stepping into that courtroom or deposition chamber.

Listen as Paul Abernathy attempts (that's a strong word when it's a podcast with no images) to explain the sometimes complicated Farm Load Calculations found in Article 220, Part V of the 2020 National Electrical Code. My electrician brothers and sisters will enjoy this as many will never deal with a farm load calculation in their lifetime.

Listen as Paul Abernathy explains receptacle ratings in 210.21(B)(1) through (B)(4) in a detailed discussion on the tables and rules associated with receptacle ratings for electricians.

Listen as Paul Abernathy explains the term Ampacity in a detailed discussion on the tables and rules associated with ampacity for electricians.

Listen as Paul Abernathy, a leading electrical industry expert on the National Electrical Codes introduces his new tutoring and consulting service for one on one as well as one on many. This service will be designed to provide valued education at affordable prices via the Electrical Code Academy, Inc. online booking system. Check out www.NECTUTOR.com for more details on the new service for electricians and engineers.

Listen as Paul Abernathy talks about what is coming up in 2021 while also explaining a few NEC questions that have been submitted. Paul also gives you some insight into the best value on courses offered by Electrical Code Academy, Inc. Be sure you listen to the entire show as Paul has some announcements at the end that may affect you all.

Join Paul and Jay as they talk about Thermoplastic and Thermoset Insulation and other important factors to consider for electricians.

Listen as Paul and Jay chat with a bonafide NFPA 70E expert on electrical safety in the workplace and even talks a little technical stuff for all your electricians. If you're in the need of some electrical training on the east coast and want a great guy as an instructor then check out Marty Schumacher and his company M.S. Electrical Training LLC.Marty Schumacher, CMECP®M.S. Electrical Training, LLC marty@mselectricaltraining.comwww.mselectricaltraining.com410-790-8993

Listen as Paul Abernathy, CEO and President of Electrical Code Academy, Inc. explains the requirements of disconnections for appliances in a way that is easy and clear for electricians to understand.

Listen as Paul Abernathy explains subdivision 210.52(H) Hallways and 210.52(I) Foyer receptacle outlet placements in the 2020 National Electrical Code for electricians.

Listen as Paul Abernathy of Master The NEC shows off some new intro music (he likes to have fun also) as we also explain what will be covered in the upcoming electrical seminar on 11/21/2020 at www.electricalinstructor.com

Listen as Paul Abernathy talks about the definitions of something (equipment) being Identified versus Listed and Labeled in the 2020 National Electrical Code. It's always important to examine the definitions of these words and how their actions can create much debate within the electrical industry. Visit www.MasterTheNEC.com for more information on our products.

Listen as Paul Abernathy of Electrical Code Academy, Inc. talks about electrical exam preparation and how a study program can really help you not only be successful but also help lead you to the next level in your electrical career. For information on their Fast Trax Electrical Exam Preparation (Prep) course and how it can help you achieve that success visit www.electricalcodeacademy.net for more information.

Listen as Paul Abernathy give his opinion on the topic of transformers and if they require working space or not. This episode is the opinion of Paul and may not align with your thoughts or opinions. The key to understanding 110.26 is the term "likely" to require.....while energized.

Are you studying for an electrical exam and need that guarantee your success. Our programs are not like other DVDs and Books as we interact with our students and personally grade all course work and provide feedback to your success. For more information on our Electrical Exam Preparation Courses visit www.MasterTheNEC.com and look under courses.COURSE SUCCESS GUARANTEE POLICY – OPTIONALStudents MUST send an email to Electrical Code Academy, Inc. within 48 hours of Fast Trax™ Program Purchase stating they would like to enroll in the 60-Day or 90-Day Study Plan Guarantee. The student MUST choose either the 60-Day or 90-Day Study Plan.Students MUST complete 100% of all Unit Material, including all competency reviews, practice exams, and final exams in the program by the end of the 60-Day or 90-Day Study Plan. The Student MUST maintain an 85% average on all unit’s competency reviews, practice exams, and final exams.Students MUST schedule and take their NEC based electrical exam within 10 days of completion of 100% of the Fast Trax™ Course material, including all competency reviews, practice exams, and final exams. If the student fails, the NEC based electrical exam they must send the failed report within 3 days via email.Students MUST re-take the originally selected 60- Day or 90-Day Study Plan, satisfy all the rules demanded in the original guarantee period, including scheduling and taking the NEC Based exam within 10 days of the second attempt in the Fast Trax™ Course. If the student fails on the second attempt send the failed report within 3 days via email and request for a refund to info@masterthenec.com

Listen as Paul chats with Professional Engineer Kyle MacKenzie on what an electrical design engineer encounters when bringing those beautiful blueprints to your electrical job.

If you are interested to find out more about "electrical exam prep" PLEASE check out: 👉 https://www.electricalcodeacademy.netThis video is all about the "electrical exam prep" subject but we also try to cover the subjects:-electrical exam -electrical test prep -journeyman electrician examPlease take 50 seconds to examine out our short vid and learn why we are the best choice regarding the journeyman electrician exam... To find out more about electrical exam prep, view the rest of this brief video, and thank me later.Problems seeing the video?The video quality you can expect a minimum of 85% of the time when you see YT on an ISP ( Web Service Provider) in a particular location. Here's what each ranking indicates:* HD Verified: you ought to anticipate smooth playback most of the time when watching HD YouTube vids. * Lower Definition: throughout playback, you may experience fuzzy image quality and regular interruptions while playing YT vids at 360p and above.To like the YouTube video, hit the thumbs up under the video player. To dislike a video, use thumbs down. To undo your choice, merely choose the icon again._________________________Follow our video clips regarding electrical exam prep and various other comparable topics on Facebook: https://www.facebook.com/masterthenec Twitter: https://twitter.com/MasterTheNEC Have I responded to all of your concerns about electrical exam prep?People who looked for an electrical exam likewise searched for electrical test prep.

Listen as Paul Abernathy talks about single receptacles and multiple receptacles on branch circuits and the connected loads that can be applied. The national electrical code gives us some direction to these load limitations that we as electricians have to be aware of. Check out this episode and be sure you visit us at www.electricalcodeacademy.net

Join Paul Abernathy as he talks about 2020 National Electrical Code section 210.25 and branch circuits that are within a building and why they are not permitted to supply other loads in outside of their original dwelling unit. Paul also talks about why individual dwelling units or tenant spaces can't also supply common loads as well for such buildings.

Introducing Paul Abernathy's own custom P-Tabs for indexing your 2020 National Electrical Code book. This kit has 135 tabs for all the most significant code articles, sections, and tables as well as the alphabetic tabs for your index. If you want a high contrast black on white tab that is easy to see in an dim exam room environment then these tabs are for you.

Listen as Paul Abernathy breaks down and explains the application associated with section 310.12 of the National Electrical Code. This is the familiar allowance for single-family dwellings and the individual dwelling units of two-family and multi-family structures. Be sure you visit www.electricalcodeacademy.net for more details on the courses that Electrical Code Academy, Inc. has to offer on the National Electrical Code.

Listen as Paul Abernathy talks about his favorite course to teach in the Electrical Code Academy, Inc. course line-up. Paul serves on CMP 5 for Article 250 so as you can imagine.....well let's just listen and see what Paul has to say about his favorite course. This question was sent in by Andrew Cassidy of New York. - Thanks, Andrew- A Thank You ECA Screwdriver is on the way!!!--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy, a nationally renowned expert on electrical exam preparation talks about the 5 stages of Electrician Exam Preparation Depression.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

We are excited to introduce the most amazing offer we have ever done here at Electrical Code Academy, Inc. We are offering (5) five of our 2020 National Electrical Code-based training programs for 24-month access. You get 365/24/7 access to our Residential Wiring, Commercial Wiring, Industrial Wiring, Grounding and Bonding, and the famous Fast Trax™ courses for a low price of $899.00. The combined value of the (5) course by themselves is $1,675.00 but we are slashing that price and throwing in the 24 months of access. We also have a SPECIAL COUPON for $150.00 off announced in this podcast. Listen to get the CODE and save $150.00 bucks instantly.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Electrical Code Academy, Inc. is excited to finally bring you a compressed 30-Day Electrical Exam Prep Course that contains all the important details, no short cuts, but will require a serious time commitment from students. The program also includes built-in tutoring sessions and a detailed analysis of the student's weaknesses that are examined. The program offers the same 365 Day Access as the normal Fast Trax Programs with some limitations. Listen to this podcast to see what those limitations are and the commitment needed to be successful in 30 days. Visit www.MasterTheNEC.com for more details on the course and the cost.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy explains that the 60 and 90 Day recommended study plan is just a study plan. The normal Fast Trax Program is what is purchased. The recommended study plans are simply a recommendation on HOW to study to achieve success in a short period of time for those who are testing in 60 or 90 days. The student still has access to the course for 12 months if they choose to study at their own pace.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as Paul Abernathy, member of CMP 5 of the National Electrical Code development committee and found of Electrical Code Academy, Inc. chats about grounding and bonding and the misconceptions when it comes to pole lights. This is a great listen for the basics of Grounding and Bonding. Also, be sure to check out our Grounding and Bonding Course at www.ElectricalInstructor.com to join our Academy.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Join us as we look at luminaries in bathtub or shower areas and what is required by the national electrical code. Electricians, both master electricians, and journeyman electricians have to be keenly aware of the requirements for locating such luminaries in these areas. While luminaries are not prohibited in these areas there are restrictions on the type of luminaries that can be installed.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

If you ever wondered what a Residential Electricians day or life is like when they wire a dwelling then here is a sneak peek into the life of Paul Abernathy back when Residential Wiring was the main focus of his life. Paul talks about how we wired dwellings and some of his thoughts and processes. Now, your methods and processes may differ and that's ok, again this is Paul's experience and not yours.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Join us as we finish up the chat on fire pumps and article 695 of the National Electrical Code. We have looked at sizing, routing, components, and power supply conductors and feeders in this 5-Part series. We end it with voltage drop and control wiring.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

The journey into Fire Pumps continues with Part 4 of this epic adventure into Article 695 of the National Electrical Code. Listen as Paul Abernathy talks continue to discuss fire pumps and now the power supply conductors and feeders.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

The journey into Fire Pumps continues with Part 3 of this epic adventure into Article 695 of the National Electrical Code. Listen as Paul Abernathy talks continue to discuss fire pumps and the associated power sources and various disconnection means and overcurrent protection where applicable.--- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

We continue our journey into Article 695 and Fire Pumps with Part 2. The national electrical code has specific rules and requirements for fire pumps and Paul Abernathy tackles the discussion by attempting to simplify the applications and how to utilize the National Electrical Code.--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

In this episode, we talk about fire pumps and how they are addressed in the national electrical code under article 695. This is part 1 of a multipart series where we tackle the most important aspects of fire pumps as it pertains to the national electrical code. Sit back and relax as we are going to go deep into fire pumps.--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Listen as we discuss what determines a continuous load and how should it be considered when doing branch circuits, feeders, or service calculations as well as in sizing conductors and overcurrent devices when utilizing the national electrical code for real life and exam preparation purposes.--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Today's lesson is on Branch Circuit minimums and that the National Electrical Code says are the minimum required branch circuits. We will also take a real-life look at the true number of branch circuits that would be required in a dwelling and focus on the mission of how many are needed as a minimum in the 2020 National Electrical Code.--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

If you are a Fast Trax Student, the Electrical Code Academy, Inc. electrical exam preparation program, then this is a MUST listen for you. There is nothing easy about the course BUT nothing worth doing is every easy so stay the course, listen to our advice and keep at the program.

Listen as Paul Abernathy, member of CMP 5 of the National Electrical Code development committee and found of Electrical Code Academy, Inc. chats about grounding and bonding and the misconceptions when it comes to pole lights. This is a great listen for the basics of Grounding and Bonding. Also, be sure to check out our Grounding and Bonding Course at www.ElectricalInstructor.com to join our Academy.

Listen as Paul Abernathy, the founder of Electrical Code Academy, Inc., explains four of the reasons a student should NOT buy our electrical exam prep programs. Electrical Exam Prep is something that is very specialized due to the desire to rapidly gain knowledge and retain that knowledge and we do not believe in the quick fix approach to learning. So listen as Paul breaks down the reasons why you should or should not buy his courses.

Join us as we finish up the chat on fire pumps and article 695 of the National Electrical Code. We have looked at sizing, routing, components, and power supply conductors and feeders in this 5-Part series. We end it with voltage drop and control wiring.

The journey into Fire Pumps continues with Part 4 of this epic adventure into Article 695 of the National Electrical Code. Listen as Paul Abernathy talks continue to discuss fire pumps and now the power supply conductors and feeders.

The journey into Fire Pumps continues with Part 3 of this epic adventure into Article 695 of the National Electrical Code. Listen as Paul Abernathy talks continue to discuss fire pumps and the associated power sources and various disconnection means and overcurrent protection where applicable.

We continue our journey into Article 695 and Fire Pumps with Part 2. The national electrical code has specific rules and requirements for fire pumps and Paul Abernathy tackles the discussion by attempting to simplify the applications and how to utilize the National Electrical Code.

In this episode, we talk about fire pumps and how they are addressed in the national electrical code under article 695. This is part 1 of a multipart series where we tackle the most important aspects of fire pumps as it pertains to the national electrical code. Sit back and relax as we are going to go deep into fire pumps.

If you ever wondered what a Residential Electricians day or life is like when they wire a dwelling then here is a sneak peek into the life of Paul Abernathy back when Residential Wiring was the main focus of his life. Paul talks about how we wired dwellings and some of his thoughts and processes. Now, your methods and processes may differ and that's ok, again this is Paul's experience and not yours.

Join us as we look at luminaries in bathtub or shower areas and what is required by the national electrical code. Electricians, both master electricians, and journeyman electricians have to be keenly aware of the requirements for locating such luminaries in these areas. While luminaries are not prohibited in these areas there are restrictions on the type of luminaries that can be installed.

Listen as we discuss what determines a continuous load and how should it be considered when doing branch circuits, feeders, or service calculations as well as in sizing conductors and overcurrent devices when utilizing the national electrical code for real life and exam preparation purposes.

Today's lesson is on Branch Circuit minimums and that the National Electrical Code says are the minimum required branch circuits. We will also take a real-life look at the true number of branch circuits that would be required in a dwelling and focus on the mission of how many are needed as a minimum in the 2020 National Electrical Code.

Listen as Paul Abernathy explains proper tabbing, free resources, and what a meter by-pass switch and why it differs from a meter disconnect. Examine the National Electrical Code for electrical exam preparation for electrical examinations and the savvy code user.

Listen as Paul Abernathy talks about his favorite course to teach in the Electrical Code Academy, Inc. course line-up. Paul serves on CMP 5 for Article 250 so as you can imagine.....well let's just listen and see what Paul has to say about his favorite course. This question was sent in by Andrew Cassidy of New York. - Thanks, Andrew- A Thank you ECA Screwdriver is on the way!

Listen as Paul Abernathy, Founder, and CEO of Electrical Code Academy, Inc. as he continues his talk into Leadership. This episode dives into how to pick your team members to achieve a successful team who are all driving for the same successful goals for the company,

Listen as Paul Abernathy, the Founder of Electrical Code Academy, Inc. makes his students a GUARANTEE on their success. For those students who purchase the Fast Trax Electrical Exam Preparation Program and utilize Paul's custom 60-Day or 90-Day Study Plan, he is offering a 100% Pass Guarantee or he will refund your purchase and you STILL get to keep the course.Here are the rules to invoke your 60-Day or 90-Day Guarantee:1) The student MUST follow the 60-day or 90-Day Study Plan 100%, the activity will be monitored at all times.2) The student MUST email Electrical Code Academy, Inc. at the time of purchase to inform the company that they are going to initiate the Guarantee Program on their choice of the 60-Day or 90-Day (Must select either and stick with it) The email is info@masterthenec.com3) Must average 85% on all competency reviews, quizzes, and Practice and Final Exams. Do not worry, these exams allow for multiple attempts.4) The student MUST complete the entire Fast Trax Course and their 60-Day or 90-Day Study Plan and take their electrical "NEC Based" exam within 10-Days of course completion.5) If the student fails their electrical exam, they must provide Electrical Code Academy, Inc. with their failing test report within 3-Days physical days of the failed exam.6) Re-Take the 60 or 90 Day Study Plan (Students Choice), follow all the rules in 1 through 5, and if they fail a second time simply send an email with a failing report within 3 physical days to info@masterthenec.com requesting a refund.If the student follows the Fast Trax Electrical Exam Prep Program they will achieve success and if they need to pass within the 60-Day or 90-Day Study Plan we can GUARANTEE that success if you follow the study plan exactly. All activity, including but not limited to login;s, exams, quizzes, reviews and study periods will be logged and recorded when the Guarantee is selected.

Paul Abernathy would like to send out a huge THANK YOU to all of the members of our paid subscription platform on our YouTube.com Channel. Since moving from Patreon to YouTube it has been much easier to allow members to join and show support. We thank you for all the ongoing support and this podcast is a shout out to all the recent members who have renewed for another month of support.

Listen as Paul Abernathy, a nationally renowned expert on electrical exam preparation talks about the 5 stages of Electrician Exam Preparation Depres

Join Paul and Jay as they discussed 5 hot topics sent in by viewers of the weekly Electrician LIVE show. They are 1) How important are business cards and vehicle logos, 2) Dress Code, 3) Biggest struggle as a new electrical contractor, 4) Outlook for 2021, and finally 5) When do you need neutrals as we end this episode on a techie note.

Join Paul Abernathy in this 5-part podcast series on leadership training. This is a must for leaders and potential leaders within your electrical contracting business, both small and large.

Listen as Paul Abernathy explains that the 60 and 90 Day recommended study plan is just a study plan. The normal Fast Trax Program is what is purchased. The recommended study plans are simply a recommendation on HOW to study to achieve success in a short period of time for those who are testing in 60 or 90 days. The student still has access to the course for 12 months if they choose to study at their own pace.

Electrical Code Academy, Inc. is excited to finally bring you a compressed 30-Day Electrical Exam Prep Course that contains all the important details, no short cuts, but will require a serious time commitment from students. The program also includes built-in tutoring sessions and a detailed analysis of the student's weaknesses that are examined. The program offers the same 365 Day Access as the normal Fast Trax Programs with some limitations. Listen to this podcast to see what those limitations are and the commitment needed to be successful in 30 days.

Listen as Paul Abernathy, the leading expert on electrical exam preparation talks about some of the free exam prep resources that are available on www.masterthenec.com and their Youtube.com/masterthenec channel.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. talks about why students struggle on exams and the proper method of study for the Fast Trax Program as well as any electrical exam prep program.

Listen as Paul Abernathy chats about the use of anti-oxidant inhibitors and/or compounds at both aluminum or copper terminations. What does the National Electrical Code require or does it actually require its use at all?

Listen to Paul Abernathy as he talks about service entrance cables and the use and code related information within article 338 of the 2020 National Electrical Code. This episode will have everything you ever wanted to know about Service Entrance Cable and More.

Listen as Paul Abernathy explains why the Fast Trax Program from Electrical Code Academy, Inc. is like no other exam preparation program on the planet. It focuses on repetition and a systematical approach to learning like no other electrical training program on the planet.

Listen as Paul Abernathy and Jay Grundberg talk about all things union versus nonunion in the electrical trade. They also include a special guest Chris Pacheco who has spent time in the union and will share his thoughts.

Listen as Paul Abernathy explains how to use the optional method in 220.84 for multifamily dwellings service and feeder calculations for 3 or more dwelling units. A detailed podcast on the steps to calculate the service and feeder in accordance with the 2020 National Electrical Code.

Listen as Paul Abernathy explains how to use the optional method for sizing the service or feeder, where permitted, load calculations using Table 220.88 in the 2020 National Electrical Code.

Listen as Paul Abernathy explains how to apply Table 220.86 Optional Method for Schools and the calculations associated with such use when electricians or electrical engineers apply the table to load calculations for services and feeders.

Introducing The Electricians Academy, the next generation of Electrical Code Academy, Inc. and electrical industry training. Designed for electricians who wish to take their game to the Next Level.Visit us at www.ElectricalInstructor.com for more information and to get notified of updates.

Listen as Paul and Jay talk about Electrical Apprentices and Helpers. They touch on the best qualities for electrical apprentices and what makes leaders.

Listen as Paul Abernathy talks about Electrical Exam Preparation and his philosophy of education for electrical exam preparation using a structured electrical exam prep program concept.

As many of you know the 2020 National Electrical Code has been published and is being adopted around the country. We have put together some exclusive video content on the 2020 NEC over on our Membership Area of the Youtube.com/MasterTheNEC site. Below is the link to that exclusive content.https://www.youtube.com/channel/UC3Yf5IlcHI60_3iYqx0G8fQ/join

Listen as Paul Abernathy and Jay Grundberg talk electrical tools on this episode of electrician live. Paul and Jay will chat about their favorite brands and you may be surprised.

Listen as Paul Abernathy explains the latest on the State of Texas in terms of 2020 NEC Updates and the COVID-19 changes to the effective date for electrical examinations using the 2020 NEC in the State of Texas.

Listen as Paul Abernathy settles the long-standing debate of pre-twisting wire connectors, such as Wire Nuts, a trademark of ideal, and Gorilla Nuts, a trademark of King Innovation. Check out this short podcast where it is finally answered.....Kinda...LOL

Join us as Paul Abernathy, founder of Electrical Code Academy, Inc. gives his opinion on the proposed expanded use of AFCI (Arc-Fault Circuit Interrupters) for Branch Circuits in the 2023 NEC development cycle. Beware as Paul has some strong opinions on this topic, which have changed over the years, as we move forward with AFCI requirements.

Listen as Paul addresses the exciting news of a new co-host of Electrician LIVE as well as some additional ways to donate and help support Electrician LIVE as well as Electrical Code Academy, Inc. by getting their exclusive mini screwdriver or now the new LED light bar as a thank you.

Listen to the PODCAST only of our Electrician LIVE Special Episode on Nikola Tesla.

Listen as Paul Abernathy, founder of Electrical Code Academy, Inc. explains the rules and changes in the NEC for the 2020 edition as it pertains to supporting a suspended ceiling fan under 314.27(C).

Listen as NEC Expert and NEC Code Panel Member Paul Abernathy clears the facts about Type NM-B Protection in an accessible attic space.

Listen to Paul Abernathy, nationally recognized NEC Expert talk about the ampacity of a conductor and how the various tables apply and how engineers can alter the ampacity of a conductor under their engineering supervision.

This is a special PROMO for the upcoming Electrician LIVE Special on July 4 about the Man, the Myth, the enigma himself Nikola Tesla. Join us at Youtube.com/masterthenec and/or ElectricianLIVE.com

Listen as my special guests Ashley Bryant and Patrick Hearn talk about the latest updates to the Siemens product line. Their new Plug-On Neutral breakers for GFCI and AFCI as well as their redesigned load centers. This is an extracted audio clip from the video that is available on our Youtube.com/Masterthenec channel

Greetings Loyal Fast Trax™ and YouTube Electrician Exam Prep Series and Higher members. We are excited to announce the launch of our weekly Fast Trax™ Live Stream Program. This will allow students to ask questions, discuss units, and participate in a more one on one format with me the creator of the Fast Trax™ Program.

Listen as nationally recognized electrical exam prep expert and author Paul Abernathy talks about the methods he recommends to reduce exam prep stress. Paul has a 3-Step Plan to reduce the stress and ace your electrical exam.Online Timer - https://www.online-stopwatch.com/timer/5minutes/

Join us as Paul Abernathy, the host of Electrician LIVE talks about the various grounding electrodes and even talks In-depth about Ground Rods, Pipes, and Plate Electrodes in this short 1-hour live show.

Listen to this PODCAST where Paul Abernathy walks you through all the 110.26 Working Space and Dedicated Equipment Space Requirements for the 2020 National Electrical Code. This episode is over 1 1/2 hours long and perfect for listening on the job site with your employer or employees so that everyone is on the same page.

Today's discussion was about a call I received this morning regarding a job site argument that turned into a shoving match and so on. Well, as a leader (Master Electrician) you need to learn skills that can deescalate the issue fast and without additional confrontation so we will discuss that here.

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. talks about their Electricity 101 Course designed to teach the fundamental basics of electricity, including AC and DC principals, Ohms Law, Series and Parallel Circuits, Motors and Transformers and so much more. This training course is designed to raise your knowledge base and help you excel in the field.

Listen as Paul Abernathy answers a few questions on the National Electrical Code. You will want to listen to the entire show as there are some great questions being asked in this episode.

Introducing a webinar on June 20, 2020, at 2:00 PM CST on the Grounding Electrode Systems and Grounding Electrodes for the 2020 National Electrical Code by Code Making Panel 5 Member Paul Abernathy. Listen for more information and sign up at https://www.electricalcodeacademy.net/gbwebinar

Listen as Paul talks about the various types of electrical podcasts available online from comedy banter styles to the informative and knowledgebased styles.

Special Announcement - All of the Electrical Code Academy, Inc. programs are now available for the 2020 National Electrical Code. Check out as we discuss all our program updates.

Join Paul in this episode where he talks about box fill basics and how to apply 314.16(A) and (B) for box fill calculations.

Listen as Paul Abernathy explains the importance of basic math skills and the different things you need to think about when answering basic electrical math equations.

Listen as Paul Abernathy, the founder, and creator of the CMECP® Program talk about why he created the CMECP® Program for Master Electricians.

Listen as we are excited to tell you about the leading electrician exam preparation program in the electrical industry. Our interactive, 100% online exam preparation and NEC learning program are now available to pre-order the 2020 NEC Edition. You get over 1,200 exam-style questions and end unit competency review questions that are graded by Paul Abernathy himself. Listen to this podcast to learn about the special offer that will not last..--- Send in a voice message: https://anchor.fm/electricianlive/messageSupport this podcast: https://anchor.fm/electricianlive/support

Do you need 100% online, easy, instant, and fast CEU or PDU Credits to renew your electrician, plumber, mechanical, or even engineering licenses? Well we have the solution with our partnership in www.MyCEUDepot.com. Check out this podcast to listen to how.--- Send in a voice message: https://anchor.fm/electricianlive/message

Listen as Paul Abernathy, Founder of Electrical Code Academy, Inc. and co-author of the 2020 NEC Residential, Commercial, and Grounding and Bonding books by Cengage Learning, Inc. talks about a special all-inclusive deal on his top 5 courses to teach you all you will ever need to know about the 2020 NEC. --- Send in a voice message: https://anchor.fm/electricianlive/message

Listen as Paul Abernathy, the OLD CODE GUY, talk about conductor sizing and how to apply adjustments and corrections to sizing a conductor. Have you ever been confused as to when you can use the 90C values of conductor insulations and so on then this is the podcast for you.

We are excited to introduce the most amazing offer we have ever done here at Electrical Code Academy, Inc. We are offering (5) five of our 2020 National Electrical Code-based training programs for 24-month access. You get 365/24/7 access to our Residential Wiring, Commercial Wiring, Industrial Wiring, Grounding and Bonding, and the famous Fast Trax™ courses for a low price of $899.00. The combined value of the (5) course by themselves is $1,675.00 but we are slashing that price and throwing in the 24 months of access. We also have a SPECIAL COUPON for $150.00 off announced in this podcast. Listen to get the CODE and save $150.00 bucks instantly.

Please support us by visiting www.myceudepot.com and getting all your online continuing educational requirements done to renew your electrical, plumbing, or mechanical license as well as engineers being able to get approved PDU hours on all types of engineering topics.

While we have been doing tutoring online for quite a few years it was time to make it official and let the world know about this little secret. We have tutored thousands of students online for years but now everyone can have access to this service. Just visit www.MasterTheNEC.com or www.ElectricalCodeAcademy.net and sign up for your 1, 2, or 3-hour session today.

We are excited to announce the upcoming release of the 2020 Fast Trax Program by giving you a pre-order discount of $20.00 off the price of the program. We all knew the price was increasing from $315.00 to $335.00 for the 2020 edition but I am excited to offer a coupon code that is only valid until 5/22/2020 for $20.00 off so that the 2020 edition is the same value as the 2017 edition for a limited time. We are so excited about this new edition to launch on 5/25/2020.

Listen as the internets most famous electrical code expert Paul Abernathy talks about the rules in 422.5(A) and (B) for GFCI and personal protection for appliances that folks may come in contact with but also the changes to the 2020 NEC. Paul also gives you some insight into what may be coming down the pike for the 2023 change cycle.

Listen as Paul Abernathy talks GFCI and the term readily accessible with fast trax student and owner of Wired Up Electrical Design in Colorado Jay Grundberg. Great discussion on the application of GFCI's in locations required by 210.8.

Listen as Paul Abernathy talks about HIS top 10 changes to the 2020 National Electrical Code. You can watch the video of this show at Youtube.com/masterthenec

Listen as Paul Abernathy of Electrician LIVE answers some common questions that have been sent to him by his students.

Listen as Paul Abernathy talks about service, feeder, and branch circuit bonding for electricians based on the 2020 National Electrical Code.

Electrician LIVE Show - April 18th Show - Diversifying Your Electrical Offerings (Podcast) _ this episode is about offering more diversity as an electrical contractor and keeping all your eggs (prospects) in a single basket. Listen and you will see what I mean.FYI- it was 2,400 homes not 4,000....Must have been dreaming of what could have been...LOL..Sorry!

Listen as Paul Abernathy talks about the wall spacing requirements in the national electrical code for wall spacing and are columns considered as wall spacing.NFPA ROP - https://www.nfpa.org/Assets/files/AboutTheCodes/70/70-A2013-ROP.pdf

Listen as Paul Abernathy explains the facts about the change in the 2020 National Electrical Code for section 230.71 regarding the Maximum Number of Disconnection Means. This change is very significant for those who are used to meeting the 6-disconnect rule in a single electrical cabinet or enclosure for service applications.

Listen as Paul Abernathy completes the series on Cable Tray Basics with a discussion of the ampacity values to be used within cables trays for conductors in cable assemblies as well as single conductor cables.

Listen as Paul Abernathy talks about cable trays and the conductors that go in them and how to determine the number of conductors or cables permitted inside of the cable tray. This is part 1 of a 2 part episode on Cable Tray Basics.

Quick promo on the March 21, 2020 show about the COVID-19 and Electricians

Listen as Paul Abernathy explains 320.23 for Type AC Cable installed "In Accessible Attics". This lesson also applies to 330.23 for Type MC Cable and 334.23 for Type NM-B Cable as well

Listen to Paul Abernathy, a nationally recognized expert on the National Electrical Code and the electrical industry talks about always doing the right thing in your company even when no one is looking.

Listen as Paul Abernathy talks about the need to evaluate your company and in some cases remove the "Cancer" within your company. The health and well being of your company stems from good public relations and keeping the discord down. Sometimes even the best employee can be theoretical cancer to the company that needs to be removed for the companies overall health.

Listen as Paul Abernathy, a nationally recognized expert on the National Electrical Code explain how to study for an electrical exam with a proven plan. Not just random reading.

Listen as Paul Abernathy talks about the release of the NEW Grounding and Bonding Book he helped produce. The book is without a doubt the best book in the industry on grounding and bonding. Both Paul and the primary author Phil Simmons serve on CMP 5 for the development of Article 250.Here is a link to the book for purchase - https://amzn.to/39XcDEAHere is a link to the Residential Book - https://amzn.to/2T3XrP7Here is a link to the Commercial Book - https://amzn.to/2SQsBuvHere is a link to our website - www.MasterTheNEC.com

If you want your Electrician LIVE Podcast Stickers or our Electrician Stickers just listen to this podcast to learn how you can get them.

LIsten as Paul Abernathy of Electrical Code Academy, Inc. talks about electrical installations and images that look nice but have potential issues in the design. The image discussed is found on our @masterthenec Facebook page belowhttps://youtube.com/masterthenec

Join nationally recognized electrical code expert Paul Abernathy as he talks about the things that may or may not per permitted in your National Electrical Code book when taking an exam. Each state is different and so always check with your local testing authority for the final permission.

Listen as National Electrical Code Expert and Founder of Electrical Code Academy, Inc. (www.masterthenec.com) talks about the differences in Single Insulated Conductors versus Single Conductor Cables with regards to the National Electrical Code and Section 392.10 of Article 392 Cable Trays.

Listen as National Electrical Code Expert and member of NFPA Code Making Panel(s) #5 and #17 - Paul Abernathy as he talks about the top 5 significant changes to the 2020 edition of the National Electrical Code (NEC) that residential electricians have to look forward to.

Listen as nationally renowned electrical code expert Paul Abernathy talks about his Electrician LIVE weekly podcast show on Saturdays at 8:00 PM CST at www.ElectricianLIVE.com. In this short episode Paul tell the audience about the new phone number they can call into the weekly show and take part in the FUN.

Listen as nationally renowned electrical code expert Paul Abernathy, founder of Electrical Code Academy, Inc. and Master The NEC at www.MasterTheNEC.com talks about the various sections in the 2020 National Electrical Code that apply to Metal-Clad Cable. Paul is also the Manager of Codes and Standards for Encore Wire Corporation as well, a manufacturer of Building Wire and Cables.

Listen as nationally renowned electrical code expert and founder of MasterTheNEC.com and host of Electrician LIVE Paul W Abernathy talks with the CEO and Founder of Solid Ground Cords, LLC. An extension cord that is revolutionizing the safety of extension cords for the construction industry.

Listen as Paul Abernathy talks about harmonics and how they can affect an electrical system. Paul also talks about ways to mitigate the harmonics in some cases.

Listen as Paul Abernathy talks about his Christmas message and thanking all his listeners and followers. This is the season to be thankful and we are truly thankful for all your listeners.

Listen as Paul Abernathy talks about a special encounter with an electrician in Virginia when Paul was the electrical supervisor.

Listen as Paul Abernathy talks about people who post images of their work on social media with tons of violations in the image. Just check them first before you press the send or post button. Just Sayin.

Listen as Paul Abernathy rants about those bashers of the NEC who do not take part in the Public Input process of a new codes development.

Have you ever wanted to know how to calculate the optional method for a new restaurant? Well, Paul has you covered in this podcast. So simply even a Plumber could do it.

Listen as Paul Abernathy talks about 10 ways to build up your electrical business organically and with some low cost options to again local market exposure. Here the link below will provide many other tips and resources to market your business and get a share of the local pie you deserve.Blue Corona - www.bluecorona.com/blog/how-to-market-electrical-contracting-business

Listen as Paul Abernathy goes over the latest data from ESFI.org for Electrical Shock and Deaths in the Construction Industry. Here is the link to the statisical data used in the show : www.esfi.org/workplace-injury-and-fatality-statistics#Stats2003-2016